This is an updated EEPROM-based board detection series that can applied if staged with other patches in the sequence proposed earlier [1].
For completeness here is the proposed sequence again, avoiding merge conflicts, but this time from the perspective of this patch series.
Step 1) Faiz' "Add Support for eMMC in Am65x-evm" series [2]. It needs a small update to actuall allow for eMMC boot I posted earlier. Step 2) The updated (v2) SYSFW loader series just posted [3] Step 3) The updated AM654x EEPROM support proposed with this series Step 4) An updated version of Lokesh's "arm: k3: Allow for exclusive and shared device requests" series [4]. In addition to a rebase such an updated series should include updating power domain properties for devices that were added during the previous steps. Step 5) An updated version of Lokesh's "arm: k3: arm64: Initial support Texas Instrument's J721E Platform" series [5] also adding in the few lines of codes to leverage SYSFW. Step 6 & beyond) Various rproc patches, etc.
Changes since v2: - Re-based for proposed staging K3 AM654x patch staging sequence
Changes since initial submission: - Re-based onto latest 'master' branch - Collected all review tags - Re-tested
[1] https://lists.denx.de/pipermail/u-boot/2019-June/371739.html [2] https://patchwork.ozlabs.org/project/uboot/list/?series=111723 [3] https://patchwork.ozlabs.org/project/uboot/list/?series=111844 [4] https://patchwork.ozlabs.org/project/uboot/list/?series=109163 [5] https://patchwork.ozlabs.org/project/uboot/list/?series=109296
-- Andreas Dannenberg Texas Instruments Inc
Andreas Dannenberg (16): arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi arm: dts: k3-am65: Add I2C nodes arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages configs: am65x_evm_defconfig: Enable I2C support configs: am65x_hs_evm_defconfig: Enable I2C support arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38 configs: am65x_evm_a53: Enable PCA953X-type GPIO driver configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver configs: am65x_evm_a53: Increase malloc pool before relocation configs: am65x_hs_evm_a53: Increase malloc pool before relocation arm: K3: am654: Map common EEPROM data into SRAM scratch space ti: common: am6: Add support for board description EEPROM ti: common: am6: Add support for setting MAC addresses board: ti: am654: Use EEPROM-based board detection configs: am65x_evm: Add support for applying overlays configs: am65x_hs_evm: Add support for applying overlays
Vignesh R (2): i2c: omap24xx_i2c: Adapt driver to support K3 devices arm: omap_i2c: Remove unwanted header file inclusion
arch/arm/dts/k3-am65-main.dtsi | 52 ++++ arch/arm/dts/k3-am65-mcu.dtsi | 11 + arch/arm/dts/k3-am65-wakeup.dtsi | 19 ++ arch/arm/dts/k3-am65.dtsi | 7 + arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 27 +- arch/arm/dts/k3-am654-base-board.dts | 22 ++ arch/arm/dts/k3-am654-r5-base-board.dts | 13 + arch/arm/include/asm/omap_i2c.h | 2 - arch/arm/mach-k3/am6_init.c | 4 + arch/arm/mach-k3/include/mach/am6_hardware.h | 3 + arch/arm/mach-k3/include/mach/sys_proto.h | 2 + board/ti/am65x/Kconfig | 7 + board/ti/am65x/evm.c | 241 ++++++++++++++++++ board/ti/common/board_detect.c | 246 +++++++++++++++++++ board/ti/common/board_detect.h | 206 ++++++++++++++++ configs/am65x_evm_a53_defconfig | 11 +- configs/am65x_evm_r5_defconfig | 4 + configs/am65x_hs_evm_a53_defconfig | 11 +- configs/am65x_hs_evm_r5_defconfig | 4 + drivers/i2c/Kconfig | 2 +- include/configs/am65x_evm.h | 18 +- 21 files changed, 884 insertions(+), 28 deletions(-)