Hi Ye,
Add support for more clocks used by iMX8 from DTB: ref_clock, tx_2x_clock, ahb_clock And update get clock rate interface to support multiple fec ports.
Signed-off-by: Ye Li ye.li@nxp.com
drivers/net/fec_mxc.c | 47 ++++++++++++++++++++++++++++++++++++++--------- drivers/net/fec_mxc.h | 1 + 2 files changed, 39 insertions(+), 9 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index d7c0809..6d485f1 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -6,7 +6,6 @@
- (C) Copyright 2007 Pengutronix, Sascha Hauer
- (C) Copyright 2007 Pengutronix, Juergen Beisert
#include <common.h> #include <dm.h> #include <environment.h> @@ -132,9 +131,9 @@ static int fec_get_clk_rate(void *udev, int idx)
dev = udev; if (!dev) {
ret = uclass_get_device(UCLASS_ETH, idx, &dev);
ret = uclass_get_device_by_seq(UCLASS_ETH, idx,&dev); if (ret < 0) {
debug("Can't get FEC udev: %d\n", ret);
debug("Can't get FEC udev%d: %d\n", idx,ret); return ret; } } @@ -149,7 +148,7 @@ static int fec_get_clk_rate(void *udev, int idx) #endif }
-static void fec_mii_setspeed(struct ethernet_regs *eth) +static void fec_mii_setspeed(struct ethernet_regs *eth, int idx) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock @@ -171,7 +170,7 @@ static void fec_mii_setspeed(struct ethernet_regs *eth) u32 hold; int ret;
- ret = fec_get_clk_rate(NULL, 0);
- ret = fec_get_clk_rate(NULL, idx); if (ret < 0) { printf("Can't find FEC0 clk rate: %d\n", ret); return;
@@ -593,7 +592,7 @@ static int fec_init(struct eth_device *dev, bd_t *bd) fec_reg_setup(fec);
if (fec->xcv_type != SEVENWIRE)
fec_mii_setspeed(fec->bus->priv);
fec_mii_setspeed(fec->bus->priv, fec->dev_id);/* Set Opcode/Pause Duration Register */ writel(0x00010020, &fec->eth->op_pause); /* FIXME
0xffff0020; */ @@ -1073,7 +1072,7 @@ struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id) free(bus); return NULL; }
- fec_mii_setspeed(eth);
- fec_mii_setspeed(eth, dev_id); return bus;
}
@@ -1142,7 +1141,7 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, fec_set_dev_name(edev->name, dev_id); fec->dev_id = (dev_id == -1) ? 0 : dev_id; fec->bus = bus;
- fec_mii_setspeed(bus->priv);
- fec_mii_setspeed(bus->priv, fec->dev_id);
#ifdef CONFIG_PHYLIB fec->phydev = phydev; phy_connect_dev(phydev, edev); @@ -1324,6 +1323,7 @@ static int fecmxc_probe(struct udevice *dev) int ret;
if (IS_ENABLED(CONFIG_IMX8)) {
struct clk ref_clk, clk_2x_txclk;@@ -1335,6 +1335,35 @@ static int fecmxc_probe(struct udevice *dev) return ret; }
ret = clk_get_by_name(dev, "ahb", &priv->ahb_clk);if (ret < 0) {debug("Can't get FEC ahb clk: %d\n", ret);return ret;}ret = clk_enable(&priv->ahb_clk);if (ret < 0) {debug("Can't enable FEC ahb clk: %d\n", ret);return ret;}ret = clk_get_by_name(dev, "enet_clk_ref", &ref_clk);
The enet clock is not only IMX8 specific.
if (ret >= 0) {ret = clk_enable(&ref_clk);if (ret < 0) {debug("Can't enable FEC ref clk:%d\n", ret);
return ret;}}ret = clk_get_by_name(dev, "enet_2x_txclk",&clk_2x_txclk);
if (ret >= 0) {ret = clk_enable(&clk_2x_txclk);if (ret < 0) {debug("Can't enable FEC 2x_tx clk:%d\n", ret);
return ret;}}- priv->clk_rate = clk_get_rate(&priv->ipg_clk); }
@@ -1368,7 +1397,6 @@ static int fecmxc_probe(struct udevice *dev) }
fec_reg_setup(priv);
- priv->dev_id = dev->seq;
#ifdef CONFIG_FEC_MXC_MDIO_BASE bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, dev->seq); @@ -1492,6 +1520,7 @@ static const struct udevice_id fecmxc_ids[] = { { .compatible = "fsl,imx53-fec" }, { .compatible = "fsl,imx7d-fec" }, { .compatible = "fsl,mvf600-fec" },
- { .compatible = "fsl,imx8qm-fec" },
Could you check if this patch doesn't break existing i.MX53, i.MX6q (mx53, mx6, mx7) by using buildman ?
https://github.com/dsd/u-boot/tree/master/tools/buildman
{ } };
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index e5f2dd7..23180a6 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -264,6 +264,7 @@ struct fec_priv { u32 interface; #endif struct clk ipg_clk;
- struct clk ahb_clk; u32 clk_rate;
};
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de