This is not used anymore, so drop it.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
drivers/misc/Makefile | 1 - drivers/misc/gpio_led.c | 106 ---------------------------------------- 2 files changed, 107 deletions(-) delete mode 100644 drivers/misc/gpio_led.c
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index dac805e4cdd..b7332587faa 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o obj-$(CONFIG_IMX8) += imx8/ obj-$(CONFIG_IMX_ELE) += imx_ele/ obj-$(CONFIG_LED_STATUS) += status_led.o -obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o obj-$(CONFIG_$(PHASE_)LS2_SFP) += ls2_sfp.o obj-$(CONFIG_$(XPL_)MXC_OCOTP) += mxc_ocotp.o diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c deleted file mode 100644 index e63689967a7..00000000000 --- a/drivers/misc/gpio_led.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Status LED driver based on GPIO access conventions of Linux - * - * Copyright (C) 2010 Thomas Chou thomas@wytron.com.tw - * Licensed under the GPL-2 or later. - */ - -#include <status_led.h> -#include <asm/gpio.h> - -#ifndef CFG_GPIO_LED_INVERTED_TABLE -#define CFG_GPIO_LED_INVERTED_TABLE {} -#endif - -static led_id_t gpio_led_inv[] = CFG_GPIO_LED_INVERTED_TABLE; - -static int gpio_led_gpio_value(led_id_t mask, int state) -{ - int i, gpio_value = (state == CONFIG_LED_STATUS_ON); - - for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) { - if (gpio_led_inv[i] == mask) - gpio_value = !gpio_value; - } - - return gpio_value; -} - -void __led_init(led_id_t mask, int state) -{ - int gpio_value; - - if (gpio_request(mask, "gpio_led") != 0) { - printf("%s: failed requesting GPIO%lu!\n", __func__, mask); - return; - } - - gpio_value = gpio_led_gpio_value(mask, state); - gpio_direction_output(mask, gpio_value); -} - -void __led_set(led_id_t mask, int state) -{ - int gpio_value = gpio_led_gpio_value(mask, state); - - gpio_set_value(mask, gpio_value); -} - -void __led_toggle(led_id_t mask) -{ - gpio_set_value(mask, !gpio_get_value(mask)); -} - -#ifdef CONFIG_GPIO_LED_STUBS - -/* 'generic' override of colored LED stubs, to use GPIO functions instead */ - -#ifdef CONFIG_LED_STATUS_RED -void red_led_on(void) -{ - __led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_ON); -} - -void red_led_off(void) -{ - __led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_OFF); -} -#endif - -#ifdef CONFIG_LED_STATUS_GREEN -void green_led_on(void) -{ - __led_set(CONFIG_LED_STATUS_GREEN, CONFIG_LED_STATUS_ON); -} - -void green_led_off(void) -{ - __led_set(CONFIG_LED_STATUS_GREEN, CONFIG_LED_STATUS_OFF); -} -#endif - -#ifdef CONFIG_LED_STATUS_YELLOW -void yellow_led_on(void) -{ - __led_set(CONFIG_LED_STATUS_YELLOW, CONFIG_LED_STATUS_ON); -} - -void yellow_led_off(void) -{ - __led_set(CONFIG_LED_STATUS_YELLOW, CONFIG_LED_STATUS_OFF); -} -#endif - -#ifdef CONFIG_LED_STATUS_BLUE -void blue_led_on(void) -{ - __led_set(CONFIG_LED_STATUS_BLUE, CONFIG_LED_STATUS_ON); -} - -void blue_led_off(void) -{ - __led_set(CONFIG_LED_STATUS_BLUE, CONFIG_LED_STATUS_OFF); -} -#endif - -#endif /* CONFIG_GPIO_LED_STUBS */