Add i2c support to aspenite board with Armada100 soc.
Signed-off-by: Lei Wen leiwen@marvell.com --- Changelog: V3: clean code sytle issue Add i2c clock enable code include in I2C configure define block
V4: make i2c definition include in the ifdef
arch/arm/cpu/arm926ejs/armada100/cpu.c | 16 +++++++++++ arch/arm/include/asm/arch-armada100/mfp.h | 40 ++++++++++++++++------------- board/Marvell/aspenite/aspenite.c | 5 +++ include/configs/aspenite.h | 14 ++++++++++ 4 files changed, 57 insertions(+), 18 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c index 62aa175..c21938e 100644 --- a/arch/arm/cpu/arm926ejs/armada100/cpu.c +++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c @@ -62,6 +62,16 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apb1clkres->gpio);
+#ifdef CONFIG_I2C_MV + /* Enable general I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + + /* Enable power I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); +#endif + /* * Enable Functional and APB clock at 14.7456MHz * for configured UART console @@ -90,3 +100,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_I2C_MV +void i2c_clk_enable(void) +{ +} +#endif diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h index d21a79f..73783a7 100644 --- a/arch/arm/include/asm/arch-armada100/mfp.h +++ b/arch/arm/include/asm/arch-armada100/mfp.h @@ -37,28 +37,32 @@ * offset, pull,pF, drv,dF, edge,eF ,afn,aF */ /* UART1 */ -#define MFP107_UART1_TXD MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST -#define MFP107_UART1_RXD MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST -#define MFP108_UART1_RXD MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST -#define MFP108_UART1_TXD MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST -#define MFP109_UART1_CTS MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP109_UART1_RTS MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP110_UART1_RTS MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP110_UART1_CTS MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP111_UART1_RI MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP111_UART1_DSR MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP112_UART1_DTR MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP112_UART1_DCD MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFP107_UART1_TXD (MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP107_UART1_RXD (MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP108_UART1_RXD (MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP108_UART1_TXD (MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP109_UART1_CTS (MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP109_UART1_RTS (MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_RTS (MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_CTS (MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_RI (MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_DSR (MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DTR (MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DCD (MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* UART2 */ -#define MFP47_UART2_RXD MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP48_UART2_TXD MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP88_UART2_RXD MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP89_UART2_TXD MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFP47_UART2_RXD (MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP88_UART2_RXD (MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* UART3 */ -#define MFPO8_UART3_RXD MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFPO9_UART3_TXD MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFPO8_UART3_RXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFPO9_UART3_TXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM) + +/* I2c */ +#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
/* More macros can be defined here... */
diff --git a/board/Marvell/aspenite/aspenite.c b/board/Marvell/aspenite/aspenite.c index 046ffd6..34ac7aa 100644 --- a/board/Marvell/aspenite/aspenite.c +++ b/board/Marvell/aspenite/aspenite.c @@ -33,9 +33,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { u32 mfp_cfg[] = { + /* I2C */ + MFP105_CI2C_SDA, + MFP106_CI2C_SCL, + /* Enable Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index fd35f3e..acaf8b2 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -63,6 +63,20 @@ #undef CONFIG_ARCH_MISC_INIT
/* + * I2C definition + */ +#define CONFIG_CMD_I2C 1 +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MV 1 +#define CONFIG_PXA_I2C_NUM 2 +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_PXA_I2C_REG {0xd4011000, 0xd4025000} +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#endif + +/* * Environment variables configurations */ #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */