Le 01/07/2010 10:41, Prafulla Wadaskar a écrit :
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Tor Krill Sent: Thursday, July 01, 2010 1:07 PM To: Albert Aribaud Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH] orion5x: edminiv2: add libata support
On Wed, 2010-06-30 at 23:30 +0200, Albert Aribaud wrote:
Signed-off-by: Albert Aribaudalbert.aribaud@free.fr
This patch:
- adds support in libata for the orion5x MVSATAHC controller;
- enables orion5x MVSTAHC port 1 on the edmini board;
- adds IDE and EXT2 commands to the edminiv2 command set.
Just a heads up. I posted a patch with a sata-driver for kirkwood a while back. (We use this with our board and it seems to work fine)
I was just trying to test it, May I know relevant board configs?
Which might have some similarities to the sata controller on orion.
like egiga, we can think of having single sata driver for this.
I'm not against looking into integrating the sata-mv driver for orion5x as a SoC; but I'll retain the IDE approach at least for the ED Mini where NOR Flash space might be scarce and disk DMA at bootloader stage isn't a must IMO.
Regarding egiga sharing between kirkwood and orion5x, I have recently submitted a set of patches to the list with a request for comments.
Regards.. Prafulla . .
Amicalement,