Now that SPL boot devices are clearly defined, we can use BOOT_DEVICE_QSPI_4 instead of a hardcoded value.
Signed-off-by: Paul Kocialkowski contact@paulk.fr --- arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index d7e2e59..38fa640 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -48,14 +48,14 @@ void save_omap_boot_params(void) if (boot_device == BOOT_DEVICE_NAND_I2C) boot_device = BOOT_DEVICE_NAND; #endif -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) +#ifdef BOOT_DEVICE_QSPI_4 /* * We get different values for QSPI_1 and QSPI_4 being used, but * don't actually care about this difference. Rather than * mangle the later code, if we're coming in as QSPI_4 just * change to the QSPI_1 value. */ - if (boot_device == 11) + if (boot_device == BOOT_DEVICE_QSPI_4) boot_device = BOOT_DEVICE_SPI; #endif