hi, I am using a packet generator on the host to generate udp packets with destination as the MAC address of my machine (doubly checked). Using the same pkt generator if i just change the destination to ff:ff:ff:ff:ff:ff then the driver accepts it. regards -kshitij
-----Original Message----- From: Wolfgang Denk [mailto:wd@denx.de] Sent: Monday, June 16, 2003 2:36 PM To: Gupta, Kshitij Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] smc 9111 driver
In message F509E6111989D311B63700805FA761DA06F990ED@dbde01.itg.ti.com you wrote:
I am facing a very unique problem with smc9111 driver. I am able to
send
packets over the wire and I am able to receive all broadcast packets. But
I
am able to receive only broadcast packets. If any packet with destination as my MAC address I am not able to see it. Has anyone else seen this problem before ??
Are you sure that you are using a legal MAC address?
Best regards,
Wolfgang Denk