From: Abhishek Shah abhishek.shah@broadcom.com
Add API to save boot parameters passed from BL31
Use assembly implementation of save_boot_params instead of c function. Because generally ATF does not set up SP_EL2 on exiting. Thus, usage of a C function immediately after exiting with no stack setup done by ATF explicitly, may cause SP_EL2 to be not sane, which in turn causes a crash if this boot was not lucky to get an SP_EL2 in valid range. Replace C implementation with assembly one which does not use stack this early, and let u-boot to set up its stack later.
Signed-off-by: Abhishek Shah abhishek.shah@broadcom.com Signed-off-by: Rajesh Ravi rajesh.ravi@broadcom.com Signed-off-by: Vladimir Olovyannikov vladimir.olovyannikov@broadcom.com Signed-off-by: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com Reviewed-by: Simon Glass sjg@chromium.org --- arch/arm/cpu/armv8/bcmns3/lowlevel.S | 9 +++++++ arch/arm/include/asm/arch-bcmns3/bl33_info.h | 26 ++++++++++++++++++++ board/broadcom/bcmns3/ns3.c | 10 ++++++++ 3 files changed, 45 insertions(+) create mode 100644 arch/arm/include/asm/arch-bcmns3/bl33_info.h
diff --git a/arch/arm/cpu/armv8/bcmns3/lowlevel.S b/arch/arm/cpu/armv8/bcmns3/lowlevel.S index 6709c9a188..bf1a17ab03 100644 --- a/arch/arm/cpu/armv8/bcmns3/lowlevel.S +++ b/arch/arm/cpu/armv8/bcmns3/lowlevel.S @@ -87,3 +87,12 @@ ENTRY(__asm_flush_l3_dcache) mov lr, x29 ret ENDPROC(__asm_flush_l3_dcache) + +ENTRY(save_boot_params) +/* + * void set_boot_params(uint64_t x0, uint64_t x1, uint64_t x2, uint64_t x3) + */ + adr x4, bl33_info + str x0, [x4] + b save_boot_params_ret +ENDPROC(save_boot_params) diff --git a/arch/arm/include/asm/arch-bcmns3/bl33_info.h b/arch/arm/include/asm/arch-bcmns3/bl33_info.h new file mode 100644 index 0000000000..bbc95b0186 --- /dev/null +++ b/arch/arm/include/asm/arch-bcmns3/bl33_info.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom. + * + */ + +#ifndef BL33_INFO_H +#define BL33_INFO_H +#include <asm/io.h> + +/* Increase version number each time this file is modified */ +#define BL33_INFO_VERSION 1 + +struct chip_info { + unsigned int chip_id; + unsigned int rev_id; +}; + +struct bl33_info { + unsigned int version; + struct chip_info chip; +}; + +extern struct bl33_info *bl33_info; + +#endif diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c index e38156723c..5e644bd466 100644 --- a/board/broadcom/bcmns3/ns3.c +++ b/board/broadcom/bcmns3/ns3.c @@ -8,6 +8,7 @@ #include <asm/io.h> #include <asm/system.h> #include <asm/armv8/mmu.h> +#include <asm/arch-bcmns3/bl33_info.h>
static struct mm_region ns3_mem_map[] = { { @@ -33,8 +34,17 @@ struct mm_region *mem_map = ns3_mem_map;
DECLARE_GLOBAL_DATA_PTR;
+/* + * Force the bl33_info to the data-section, as .bss will not be valid + * when save_boot_params is invoked. + */ +struct bl33_info *bl33_info __section(".data"); + int board_init(void) { + if (bl33_info->version != BL33_INFO_VERSION) + printf("*** warning: ATF BL31 and u-boot not in sync! ***\n"); + return 0; }