Allow this driver to be used in TPL by setting up the interrupt type correctly.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: None
arch/x86/cpu/apollolake/itss.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/x86/cpu/apollolake/itss.c b/arch/x86/cpu/apollolake/itss.c index 9a4d159ebf..8aec64e000 100644 --- a/arch/x86/cpu/apollolake/itss.c +++ b/arch/x86/cpu/apollolake/itss.c @@ -146,6 +146,15 @@ static int apl_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num) return -ENOENT; }
+static int apl_itss_bind(struct udevice *dev) +{ + /* This is not set with of-platdata, so set it manually */ + if (CONFIG_IS_ENABLED(OF_PLATDATA)) + dev->driver_data = X86_IRQT_ITSS; + + return 0; +} + static int apl_itss_ofdata_to_platdata(struct udevice *dev) { struct apl_itss_priv *priv = dev_get_priv(dev); @@ -208,6 +217,7 @@ U_BOOT_DRIVER(apl_itss_drv) = { .id = UCLASS_IRQ, .of_match = apl_itss_ids, .ops = &apl_itss_ops, + .bind = apl_itss_bind, .ofdata_to_platdata = apl_itss_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct apl_itss_platdata), .priv_auto_alloc_size = sizeof(struct apl_itss_priv),