Since exynos4 and exyno5 share many settings, we should move these into a common file to avoid duplication.
Effective changes are: - All exynos boards now have EXT4 and FAT write support - this affects exynos5250 and exynos5420 which previously did not. This also disables the ext2 commands which are equivalent to ext4 anyway.
Signed-off-by: Simon Glass sjg@chromium.org ---
include/configs/exynos-common.h | 93 +++++++++++++++++++++++++++++++++++++ include/configs/exynos4-common.h | 81 +------------------------------- include/configs/exynos5-common.h | 90 +++++------------------------------ include/configs/origen.h | 3 -- include/configs/s5pc210_universal.h | 3 -- include/configs/smdk5250.h | 4 -- include/configs/snow.h | 4 -- include/configs/trats.h | 4 -- include/configs/trats2.h | 4 -- 9 files changed, 107 insertions(+), 179 deletions(-) create mode 100644 include/configs/exynos-common.h
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h new file mode 100644 index 0000000..0308b88 --- /dev/null +++ b/include/configs/exynos-common.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * + * Common configuration settings for the SAMSUNG EXYNOS boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __EXYNOS_COMMON_H +#define __EXYNOS_COMMON_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_S5P /* S5P Family */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <linux/sizes.h> + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_COMMON +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* Enable fdt support */ +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE +#define CONFIG_OF_LIBFDT + +/* Keep L2 Cache Disabled */ +#define CONFIG_CMD_CACHE + +/* input clock of PLL: 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING +#define CONFIG_ENV_OVERWRITE + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) + +/* select serial console configuration */ +#define CONFIG_BAUDRATE 115200 + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_S5P_SDHCI +#define CONFIG_SDHCI +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_BOUNCE_BUFFER + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +/* PWM */ +#define CONFIG_PWM + +/* Command definition*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS + +#endif /* __CONFIG_H */ diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 24ee2d5..dc91e0e 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -9,85 +9,29 @@ #ifndef __CONFIG_EXYNOS4_COMMON_H #define __CONFIG_EXYNOS4_COMMON_H
-/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS4 /* which is in a Exynos4 Family */ +#define CONFIG_EXYNOS4 /* Exynos4 Family */
-#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_COMMON -#define CONFIG_SYS_GENERIC_BOARD - -/* Enable fdt support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE +#include "exynos-common.h"
#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - -#include <linux/sizes.h>
/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_S5P_SDHCI -#define CONFIG_SDHCI #define CONFIG_MMC_SDMA -#define CONFIG_DWMMC -#define CONFIG_EXYNOS_DWMMC -#define CONFIG_BOUNCE_BUFFER #define CONFIG_MMC_DEFAULT_DEV 0
-/* PWM */ -#define CONFIG_PWM - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition*/ -#include <config_cmd_default.h> - #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_MISC #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS #undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CACHE #undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MMC #define CONFIG_CMD_DFU #define CONFIG_CMD_GPT #define CONFIG_CMD_PMIC #define CONFIG_CMD_SETEXPR
-#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -/* FAT */ -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE - -/* EXT4 */ -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE - /* USB Composite download gadget - g_dnl */ #define CONFIG_USBDOWNLOAD_GADGET
@@ -107,26 +51,8 @@ #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_G_DNL_MANUFACTURER "Samsung"
-/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_PART -#define CONFIG_PARTITION_UUIDS - #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED @@ -135,7 +61,4 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_GADGET_MASS_STORAGE
-/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - #endif /* __CONFIG_EXYNOS4_COMMON_H */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 7f66a46..b745f6a 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -9,25 +9,14 @@ #ifndef __CONFIG_EXYNOS5_COMMON_H #define __CONFIG_EXYNOS5_COMMON_H
-/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_COMMON +#define CONFIG_EXYNOS5 /* Exynos5 Family */ + +#include "exynos-common.h" + +#define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL
-/* Enable fdt support for Exynos5250 */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE @@ -36,22 +25,11 @@ #define CONFIG_TRACE_EARLY #define CONFIG_TRACE_EARLY_ADDR 0x50000000
-/* Keep L2 Cache Disabled */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_CMD_CACHE
/* Enable ACE acceleration for SHA1 and SHA256 */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_SHA_HW_ACCEL
-/* input clock of PLL: SMDK5250 has 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 @@ -63,13 +41,12 @@ #define INFORM2_OFFSET 0x808 #define INFORM3_OFFSET 0x80c
-/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) - /* select serial console configuration */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 #define CONFIG_SILENT_CONSOLE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_CONSOLE_MUX
/* Enable keyboard */ #define CONFIG_CROS_EC /* CROS_EC protocol */ @@ -78,8 +55,6 @@ #define CONFIG_KEYBOARD
/* Console configuration */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV #define EXYNOS_DEVICE_SETTINGS \ "stdin=serial,cros-ec-keyb\0" \ "stdout=serial,lcd\0" \ @@ -88,39 +63,11 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS
-/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI -#define CONFIG_DWMMC -#define CONFIG_EXYNOS_DWMMC -#define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_BOUNCE_BUFFER - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* PWM */ -#define CONFIG_PWM - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition*/ -#include <config_cmd_default.h> - #define CONFIG_CMD_PING #define CONFIG_CMD_ELF -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_NET #define CONFIG_CMD_HASH
-#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - /* Thermal Management Unit */ #define CONFIG_EXYNOS_TMU #define CONFIG_CMD_DTT @@ -136,6 +83,7 @@ /* MMC SPL */ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 +#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT @@ -144,14 +92,8 @@ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) @@ -178,10 +120,6 @@
#define CONFIG_SYS_MONITOR_BASE 0x00000000
-/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS - #define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SECURE_BL1_ONLY @@ -214,11 +152,6 @@ #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_PART -#define CONFIG_PARTITION_UUIDS - /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C @@ -272,9 +205,6 @@ #define CONFIG_MENU #endif
-/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY @@ -294,4 +224,8 @@ #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
+/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + #endif /* __CONFIG_EXYNOS5_COMMON_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index cd22723..13bed28 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -37,9 +37,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
-/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 066fc02..cd4cdfe 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -29,9 +29,6 @@
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 751b5eb..37dc092 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -14,8 +14,4 @@ #undef CONFIG_DEFAULT_DEVICE_TREE #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250
-/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH - #endif /* __CONFIG_SMDK_H */ diff --git a/include/configs/snow.h b/include/configs/snow.h index 78adca8..58b011d 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -14,8 +14,4 @@ #undef CONFIG_DEFAULT_DEVICE_TREE #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow
-/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH - #endif /* __CONFIG_SNOW_H */ diff --git a/include/configs/trats.h b/include/configs/trats.h index e3263cc..933cda5 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -41,10 +41,6 @@
#define CONFIG_SYS_TEXT_BASE 0x63300000
-#include <linux/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/trats2.h b/include/configs/trats2.h index d0b00c0..1c1297b 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -38,10 +38,6 @@
#define CONFIG_SYS_TEXT_BASE 0x43e00000
-#include <linux/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200