From: Peng Fan peng.fan@nxp.com
Current DM CLK is a bit complicated, for simplity, let DM clk only support enable/disable/get_rate. For the expected rate settings, we use non-DM clk to do that. Then we could have simple DM clk for i.MX and could also share between SPL/U-Boot proper.
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 66 ++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 0a8208606d..68effbd54f 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -317,6 +317,72 @@ void init_wdog_clk(void) clock_enable(CCGR_WDOG3, 1); }
+void init_clk_usdhc(u32 index) +{ + /* + * set usdhc clock root + * sys pll1 400M + */ + switch (index) { + case 0: + clock_enable(CCGR_USDHC1, 0); + clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(1)); + clock_enable(CCGR_USDHC1, 1); + return; + case 1: + clock_enable(CCGR_USDHC2, 0); + clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(1)); + clock_enable(CCGR_USDHC2, 1); + return; + case 2: + clock_enable(CCGR_USDHC3, 0); + clock_set_target_val(USDHC3_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(1)); + clock_enable(CCGR_USDHC3, 1); + return; + default: + printf("Invalid usdhc index\n"); + return; + } +} + +void init_clk_ecspi(u32 index) +{ + switch (index) { + case 0: + clock_enable(CCGR_ECSPI1, 0); + clock_set_target_val(ECSPI1_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_enable(CCGR_ECSPI1, 1); + return; + case 1: + clock_enable(CCGR_ECSPI2, 0); + clock_set_target_val(ECSPI2_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_enable(CCGR_ECSPI2, 1); + case 2: + clock_enable(CCGR_ECSPI3, 0); + clock_set_target_val(ECSPI3_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0)); + clock_enable(CCGR_ECSPI3, 1); + return; + default: + printf("Invalid ecspi index\n"); + return; + } +} + +void init_nand_clk(void) +{ + /* + * set rawnand root + * sys pll1 400M + */ + clock_enable(CCGR_RAWNAND, 0); + clock_set_target_val(NAND_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(3) | CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4)); /* 100M */ + clock_enable(CCGR_RAWNAND, 1); +} + int clock_init(void) { u32 val_cfg0;