-----Original Message----- From: curtis.machida@intel.com curtis.machida@intel.com Sent: Saturday, April 13, 2024 4:27 AM To: u-boot@lists.denx.de; Peng Fan peng.fan@nxp.com; Jaehoon Chung jh80.chung@samsung.com Cc: cmachida curtis.machida@intel.com; Jonas Karlman jonas@kwiboo.se; Kever Yang <kever.yang@rock- chips.com>; Peter Geis pgwipeout@gmail.com; Sean Anderson sean.anderson@seco.com; Simon Glass sjg@chromium.org; Tom Rini trini@konsulko.com Subject: [PATCH] mmc: sdhci: programmable clock calculation needs multiplier +1
From: cmachida curtis.machida@intel.com
According to the SD Host Controller Simplified Specification v4.20, the multiplier value M is one more than the Clock Multiplier field.
Copied code from Linux project. drivers/mmc/host/sdhci.c line 4405
Signed-off-by: cmachida curtis.machida@intel.com
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
drivers/mmc/sdhci.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 0178ed8a11..a8476ec4e9 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -929,6 +929,15 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, debug("%s, caps_1: 0x%x\n", __func__, caps_1); host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
/** In case the value in Clock Multiplier is 0, then programmable* clock mode is not supported, otherwise the actual clock* multiplier is one more than the value of Clock Multiplier* in the Capabilities Register.*/if (host->clk_mul)host->clk_mul += 1;}
if (host->max_clk == 0) {
-- 2.43.2