On Fri, 16 Feb 2024 at 02:23, Caleb Connolly caleb.connolly@linaro.org wrote:
Import PM8994 and PMI8994 DTSI files in preparation for switching MSM8996 boards to upstream DTS.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
arch/arm/dts/pm8994.dtsi | 152 ++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/pmi8994.dtsi | 65 ++++++++++++++++++++ 2 files changed, 217 insertions(+)
Reviewed-by: Sumit Garg sumit.garg@linaro.org
-Sumit
diff --git a/arch/arm/dts/pm8994.dtsi b/arch/arm/dts/pm8994.dtsi new file mode 100644 index 000000000000..d44a95caf04a --- /dev/null +++ b/arch/arm/dts/pm8994.dtsi @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h>
+/ {
thermal-zones {pm8994-thermal {polling-delay-passive = <250>;polling-delay = <1000>;thermal-sensors = <&pm8994_temp>;trips {pm8994_alert0: pm8994-alert0 {temperature = <95000>;hysteresis = <2000>;type = "passive";};pm8994_crit: pm8994-crit {temperature = <125000>;hysteresis = <2000>;type = "critical";};};};};+};
+&spmi_bus {
pmic@0 {compatible = "qcom,pm8994", "qcom,spmi-pmic";reg = <0x0 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;rtc@6000 {compatible = "qcom,pm8941-rtc";reg = <0x6000>, <0x6100>;reg-names = "rtc", "alarm";interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;};pm8994_pon: pon@800 {compatible = "qcom,pm8916-pon";reg = <0x800>;mode-bootloader = <0x2>;mode-recovery = <0x1>;pwrkey {compatible = "qcom,pm8941-pwrkey";interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;debounce = <15625>;bias-pull-up;linux,code = <KEY_POWER>;};pm8994_resin: resin {compatible = "qcom,pm8941-resin";interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;debounce = <15625>;bias-pull-up;status = "disabled";};};pm8994_temp: temp-alarm@2400 {compatible = "qcom,spmi-temp-alarm";reg = <0x2400>;interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;io-channels = <&pm8994_vadc VADC_DIE_TEMP>;io-channel-names = "thermal";#thermal-sensor-cells = <0>;};pm8994_vadc: adc@3100 {compatible = "qcom,spmi-vadc";reg = <0x3100>;interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;#address-cells = <1>;#size-cells = <0>;#io-channel-cells = <1>;channel@7 {reg = <VADC_VSYS>;qcom,pre-scaling = <1 3>;label = "vph_pwr";};channel@8 {reg = <VADC_DIE_TEMP>;label = "die_temp";};channel@9 {reg = <VADC_REF_625MV>;label = "ref_625mv";};channel@a {reg = <VADC_REF_1250MV>;label = "ref_1250mv";};channel@e {reg = <VADC_GND_REF>;};channel@f {reg = <VADC_VDD_VADC>;};};pm8994_gpios: gpio@c000 {compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";reg = <0xc000>;gpio-controller;gpio-ranges = <&pm8994_gpios 0 0 22>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;};pm8994_mpps: mpps@a000 {compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp";reg = <0xa000>;gpio-controller;#gpio-cells = <2>;gpio-ranges = <&pm8994_mpps 0 0 8>;interrupt-controller;#interrupt-cells = <2>;};};pmic@1 {compatible = "qcom,pm8994", "qcom,spmi-pmic";reg = <0x1 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;pm8994_lpg: pwm {compatible = "qcom,pm8994-lpg";#address-cells = <1>;#size-cells = <0>;#pwm-cells = <2>;status = "disabled";};pm8994_spmi_regulators: regulators {compatible = "qcom,pm8994-regulators";};};+}; diff --git a/arch/arm/dts/pmi8994.dtsi b/arch/arm/dts/pmi8994.dtsi new file mode 100644 index 000000000000..36d6a1fb553a --- /dev/null +++ b/arch/arm/dts/pmi8994.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h>
+&spmi_bus {
pmic@2 {compatible = "qcom,pmi8994", "qcom,spmi-pmic";reg = <0x2 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;pmi8994_gpios: gpio@c000 {compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";reg = <0xc000>;gpio-controller;gpio-ranges = <&pmi8994_gpios 0 0 10>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;};pmi8994_mpps: mpps@a000 {compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";reg = <0xa000>;gpio-controller;gpio-ranges = <&pmi8994_mpps 0 0 4>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;};};pmic@3 {compatible = "qcom,pmi8994", "qcom,spmi-pmic";reg = <0x3 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;pmi8994_lpg: pwm {compatible = "qcom,pmi8994-lpg";#address-cells = <1>;#size-cells = <0>;#pwm-cells = <2>;status = "disabled";};pmi8994_spmi_regulators: regulators {compatible = "qcom,pmi8994-regulators";};pmi8994_wled: wled@d800 {compatible = "qcom,pmi8994-wled";reg = <0xd800>, <0xd900>;interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;interrupt-names = "ovp", "short";qcom,cabc;qcom,external-pfet;status = "disabled";};};+};
-- 2.43.1