Re: [U-Boot] [Patch v3 0/4] imx: mx6: use OTP for teperature grade info

19 May 2015


      Hi Peng, Tim,
On 19/05/2015 02:21, Peng Fan wrote:
...
U-Boot 2015.07-rc1-00260-g44bf513 (May 19 2015 - 09:14:52)
CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
Reset cause: POR
Board: MX6SX SABRE SDB
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE100 ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
=>
Tested-by: Peng Fan Peng.Fan@freescale.com
Thanks.
It looks like the last issue was solved - if nobody else complains,
these patches are ready for merging.
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================