I have a custom MPC8313ERD board loaded with u-boot 1.1.6 and the network PHY is NetSemi DP83849C. The PHY info is copied from DP83865 and the network works fine.
Recently I am trying to upgrade u-boot to 2010.12 but I got Ping failed and host is not alive message when I ping the same host. After enabling debug, it shows: Trying TSEC0 Speed: 10, half duplex Using TSEC0 device sending ARP for 0a350275 ARP broadcast 1 TSEC0: tsec: tx error ARP broadcast 2 TSEC0: tsec: tx buffers full ping failed; host 10.53.2.117 is not alive
After googling the problem, I learned this may be related to the some kind of bus conflict when DMA move ip packet to transmit bugger. My question is what caused this error in 2010.12 version and not in 1.1.6?