OMAP NAND driver can detect Page-size and OOB-size of NAND device from ONFI params or nand_id[] table. And based on that it defines ECC layout. This patch 1) removes following board configs used for defining NAND ECC layout - GPMC_NAND_ECC_LP_x16_LAYOUT (for large page x16 NAND) - GPMC_NAND_ECC_LP_x8_LAYOUT (for large page x8 NAND) - GPMC_NAND_ECC_SP_x16_LAYOUT (for small page x16 NAND) - GPMC_NAND_ECC_SP_x8_LAYOUT (for small page x8 NAND)
2) removes unused #defines in common omap_gpmc.h depending on above configs
Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: Pekon Gupta pekon@ti.com --- arch/arm/include/asm/omap_gpmc.h | 47 ---------------------------------- include/configs/am335x_evm.h | 1 - include/configs/am335x_igep0033.h | 1 - include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/cm_t35.h | 2 -- include/configs/devkit8000.h | 2 -- include/configs/dig297.h | 2 -- include/configs/mcx.h | 1 - include/configs/omap3_beagle.h | 2 -- include/configs/omap3_evm_common.h | 1 - include/configs/omap3_igep00x0.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_overo.h | 2 -- include/configs/omap3_pandora.h | 2 -- include/configs/omap3_zoom1.h | 2 -- include/configs/omap3_zoom2.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tricorder.h | 2 -- 20 files changed, 74 deletions(-)
diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index 5250109..3caaed8 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -12,53 +12,6 @@ #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1
-/* Generic ECC Layouts */ -/* Large Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ - 9, 10, 11, 12},\ - .oobfree = {\ - {.offset = 13,\ - .length = 51 } } \ -} -#endif - -/* Large Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13},\ - .oobfree = {\ - {.offset = 14,\ - .length = 50 } } \ -} -#endif - -/* Small Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {1, 2, 3},\ - .oobfree = {\ - {.offset = 4,\ - .length = 12 } } \ -} -#endif - -/* Small Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {2, 3, 4},\ - .oobfree = {\ - {.offset = 5,\ - .length = 11 } } \ -} -#endif - enum omap_ecc { /* 1-bit ECC calculation by Software, Error detection by Software */ OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index d75df92..9ccbc20 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -381,7 +381,6 @@ /* NAND support */ #ifdef CONFIG_NAND #define CONFIG_CMD_NAND -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) #define MTDIDS_DEFAULT "nand0=omap2-nand.0" #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index 115d1b3..c00d54f 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -188,7 +188,6 @@ #define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION 1 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 468fb43..4407b45 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -268,7 +268,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index a3473b5..7f52ce4 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -262,7 +262,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index f4ecd0d..52a1f05 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -165,8 +165,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x8_LAYOUT - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ /* Environment information */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 4f43ba9..16a00eb 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -116,8 +116,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ #define CONFIG_JFFS2_NAND diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 5049afc..af6f56b 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -143,8 +143,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
#if defined(CONFIG_CMD_NET) diff --git a/include/configs/mcx.h b/include/configs/mcx.h index dcd29ce..dd4afb8 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -321,7 +321,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 9eab190..8127f87 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -183,8 +183,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 43616e2..7f3424b 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -208,7 +208,6 @@ #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #elif defined(CONFIG_CMD_ONENAND) #define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 71062a6..172c3a3 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -267,7 +267,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_BASE NAND_BASE -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index bedd6f9..0d03c75 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -295,7 +295,6 @@
#if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #endif diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index e0f0262..007e27f 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -119,8 +119,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand */ /* at CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ #define CONFIG_JFFS2_NAND diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index eacdfaa..da67787 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -131,8 +131,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand */ /* at CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 1dd53fa..f0fa96e 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -138,8 +138,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ #define CONFIG_JFFS2_NAND diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index f749740..8b0ac3d 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -158,7 +158,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1
/* Environment information */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index f37653f..018e22b 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -432,7 +432,6 @@
#define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ /* to access nand at */ /* CS0 */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 439fc47..d3f9a4e 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -186,7 +186,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index b38b955..5940c03 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ #define CONFIG_BCH