From: Haikun Wang Haikun.Wang@freescale.com
Enable Driver Model SPI for ls1021aqds board. DSPI and QSPI is enabled only when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI.
Signed-off-by: Haikun Wang Haikun.Wang@freescale.com Reviewed-by: Jagan Teki jteki@openedev.com --- Changes in v7: - Rebase to master
Changes in v4: - Add defconfig patch in this series
Changes in v3: - Remove CONFIG_SPI_FLASH_ATMEL - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig, and DM core code use IS_ENABLED(), so configure option in head file can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM CONFIG_DM_SPI
Changes in v2: - Move all changes inside of CONFIG_QSPI_BOOT
include/configs/ls1021aqds.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5c9d275..973454b 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -407,15 +407,24 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION
-/* QSPI */ +/* SPI */ #ifdef CONFIG_QSPI_BOOT +/* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SPI_FLASH_SPANSION
+/* DSPI */ +#define CONFIG_FSL_DSP + +/* DM SPI */ +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_DM_SPI_FLASH +#define CONFIG_SF_DATAFLASH +#endif #endif
/*