From: Peng Fan peng.fan@nxp.com
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 4 ++++ board/beacon/imx8mn/spl.c | 10 ---------- 2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi index 69fd69c8d02..eb1dd8debba 100644 --- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi @@ -132,6 +132,10 @@ u-boot,dm-spl; };
+&pinctrl_wdog { + u-boot,dm-spl; +}; + &binman { u-boot-spl-ddr { filename = "u-boot-spl-ddr.bin"; diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c index 4563446db19..029f71bc995 100644 --- a/board/beacon/imx8mn/spl.c +++ b/board/beacon/imx8mn/spl.c @@ -68,27 +68,17 @@ int board_fit_config_name_match(const char *name) } #endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define PWM1_PAD_CTRL (PAD_CTL_FSEL2 | PAD_CTL_DSE6)
static iomux_v3_cfg_t const pwm_pads[] = { IMX8MN_PAD_GPIO1_IO01__PWM1_OUT | MUX_PAD_CTRL(PWM1_PAD_CTRL), };
-static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - int board_early_init_f(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - /* Claiming pwm pins prevents LCD flicker during startup*/ imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - set_wdog_reset(wdog); - init_uart_clk(1);
return 0;