Hello Everyone:
We have become quite interested in using u-boot's tftp & dhcp features. Unfortunately, our custom board has only a PCMCIA slot (no ethernet interface). So if we are to use networking at all, we'll have to do it with PCMCIA cards.
What is the status of PCMCIA networking in u-boot? I have looked through the sources and it seems that current PCMCIA functionality is limited to ATA flash cards at the moment. If this is so, what would we have to do to get PCMCIA networking running in u-boot?
I am not put off by working on PCMCIA drivers - I have already done a lot of PCMCIA net driver work this month, so a little bit more isn't going to kill me. We need to get NE2000 working first, and then Cisco/Aironet wireless working after that. If at all possible, please say a few words about what would have to be done where in u-boot to make this happen. I am first and foremost interested in doing this job correctly so that I can submit patches to Wolfgang et al.
Thanks in advance, craig vanderborgh voxware incorporated