Thank you for your reply Mr. Likely!
I was indeed using the wrong image file. So I've tried the uImage generated by the kernel build, and it still hangs. It might be the addresses I'm using. I've read some FAQs sections that seemed to give me some hope, but they all were related to wrong RAM addresses or not related to device trees at all, just to the old cuImage booting procedures.
Anyway, thanks for your interest, Mr. Likely.
----- Original Message ----- From: "Grant Likely" To: "Marco Antônio Possamai" Cc: "U-Boot" Subject: Re: [U-Boot] U-Boot hangs after uncompressing kernel image on MPC5200B Date: Thu, 22 Jan 2009 07:30:01 -0700
On Thu, Jan 22, 2009 at 4:05 AM, Marco Antônio Possamai wrote:
Hello, all.
My goal is to succesfully pass a 2.6.26 linux kernel to the
MPC5200B
using the three-argument command bootm.
[...]
I've built the image using the make ARCH=powerpc zImage command. It creates the cuImage.lite5200b along with the lite5200.dts (which
I've
compiled to a lite5200.dtb using the above mentioned dtc).
If you want to use the 3 argument bootm (kerneladdr, rootfsaddr, dtbaddr) then you need to use the uImage produced by the kernel build, *not* the cuImage. The cuImage is a backwards compatible image for the older 2 argument bootm command.
g.
-- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.
Marco Antônio Possamai
Universidade Federal de Santa Catarina