If the PCI controller wasn't configured or enabled delete from the device tree (include its alias).
For the case that we didn't even configure u-boot with knowledge of the controller we can use the fact that the pci_controller pointer is NULL to delete the node in the device tree. We determine that a controller was not setup (because of HW config) based on the fact that cfg_addr wasn't setup.
Signed-off-by: Kumar Gala galak@kernel.crashing.org --- drivers/pci/fsl_pci_init.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index fe57926..3a60236 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -513,10 +513,18 @@ void ft_fsl_pci_setup(void *blob, const char *pci_alias, struct pci_controller *hose) { int off = fdt_path_offset(blob, pci_alias); + u32 bus_range[2];
- if (off >= 0) { - u32 bus_range[2]; + if (off < 0) + return; + + /* We assume a cfg_addr not being set means we didn't setup the controller */ + if ((hose == NULL) || (hose->cfg_addr == NULL)) { + fdt_del_node(blob, off);
+ off = fdt_path_offset(blob, "/aliases"); + fdt_delprop(blob, off, pci_alias); + } else { bus_range[0] = 0; bus_range[1] = hose->last_busno - hose->first_busno; fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);