Another ping for this old patch.. This still applies cleanly, and I have verified those macros are unused by those boards. There were no objections so far, and Steve ACKed it.
On Wed, Jun 9, 2010 at 12:30 AM, Paulraj, Sandeep s-paulraj@ti.com wrote:
Just a ping. Sandeep, maybe you could pick this? Those defines are mostly dead code.
Not pushed yet.
I have cc'ed all the concerned board maintainers in case they have an objection.
On Thu, Apr 29, 2010 at 5:19 PM, Grazvydas Ignotas notasas@gmail.com wrote:
Most OMAP3 boards have various flash related macros in their configs that are either not referenced anywhere in the code or are used by drivers that are not enabled. Remove them.
Signed-off-by: Grazvydas Ignotas notasas@gmail.com
include/configs/omap3_beagle.h | 18 ------------------ include/configs/omap3_evm.h | 18 ------------------ include/configs/omap3_overo.h | 18 ------------------ include/configs/omap3_pandora.h | 20 -------------------- include/configs/omap3_sdp3430.h | 7 ------- include/configs/omap3_zoom1.h | 18 ------------------ include/configs/omap3_zoom2.h | 10 ---------- 7 files changed, 0 insertions(+), 109 deletions(-)
diff --git a/include/configs/omap3_beagle.h
b/include/configs/omap3_beagle.h
index 08d79ac..f8266b1 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -291,9 +291,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -310,21 +307,6 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 0d99f7d..39eb4b5 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -295,9 +295,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
*/
- /* on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -314,21 +311,6 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR boot_flash_env_addr
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; diff --git a/include/configs/omap3_overo.h
b/include/configs/omap3_overo.h
index a43500b..b5b2dbe 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -260,9 +260,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -279,21 +276,6 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; diff --git a/include/configs/omap3_pandora.h
b/include/configs/omap3_pandora.h
index 945c053..9e3ee99 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -252,40 +252,20 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
/* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_ENV_IS_IN_NAND 1 -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts
here */
#define SMNAND_ENV_OFFSET 0x240000 /* environment starts
here */
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; diff --git a/include/configs/omap3_sdp3430.h
b/include/configs/omap3_sdp3430.h
index b4919db..e3a7073 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -158,10 +158,6 @@ #define PHYS_FLASH_SIZE (128 << 20) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one
chip */
-/* timeout values are in milliseconds */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
#define CONFIG_ENV_IS_IN_FLASH 1 @@ -337,9 +333,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
/* * NAND FLASH usage ... default nCS1: * - four 128KB sectors for X-Loader diff --git a/include/configs/omap3_zoom1.h
b/include/configs/omap3_zoom1.h
index ae7ebf9..834d8f0 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -276,9 +276,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -295,21 +292,6 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; diff --git a/include/configs/omap3_zoom2.h
b/include/configs/omap3_zoom2.h
index c88c732..865659f 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -245,9 +245,6 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors
on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash
banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -262,13 +259,6 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*---------------------------------------------------------------------
--
- CFI FLASH driver setup
- */
-/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
#ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; -- 1.6.3.3