The J721E SoCs have two TMS320C66x DSP Core Subsystems (C66x CorePacs) in the MAIN voltage domain, each with a C66x Fixed/Floating-Point DSP Core, and 32 KB of L1P & L1D configurable SRAMs/Cache and an additional 288 KB of L2 configurable SRAM/Cache. These subsystems do not have an MMU but contain a Region Address Translator (RAT) sub-module for translating 32-bit processor addresses into larger bus addresses. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Add the DT nodes for these DSP processor sub-systems in the common k3-j721e-main.dtsi file.
Signed-off-by: Suman Anna s-anna@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/dts/k3-j721e-common-proc-board.dts | 2 ++ arch/arm/dts/k3-j721e-main.dtsi | 24 +++++++++++++++++++++ 2 files changed, 26 insertions(+)
diff --git a/arch/arm/dts/k3-j721e-common-proc-board.dts b/arch/arm/dts/k3-j721e-common-proc-board.dts index 21afdc8ce0..a548277718 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-common-proc-board.dts @@ -20,6 +20,8 @@ remoteproc3 = &main_r5fss0_core1; remoteproc4 = &main_r5fss1_core0; remoteproc5 = &main_r5fss1_core1; + remoteproc6 = &c66_0; + remoteproc7 = &c66_1; }; };
diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi index 59ca4e5686..c3aa0cdcf1 100644 --- a/arch/arm/dts/k3-j721e-main.dtsi +++ b/arch/arm/dts/k3-j721e-main.dtsi @@ -304,4 +304,28 @@ loczrama = <1>; }; }; + + c66_0: dsp@4d80800000 { + compatible = "ti,j721e-c66-dsp"; + reg = <0x4d 0x80800000 0x00 0x00048000>, + <0x4d 0x80e00000 0x00 0x00008000>, + <0x4d 0x80f00000 0x00 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <142>; + ti,sci-proc-ids = <0x03 0xFF>; + resets = <&k3_reset 142 1>; + }; + + c66_1: dsp@4d81800000 { + compatible = "ti,j721e-c66-dsp"; + reg = <0x4d 0x81800000 0x00 0x00048000>, + <0x4d 0x81e00000 0x00 0x00008000>, + <0x4d 0x81f00000 0x00 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <143>; + ti,sci-proc-ids = <0x04 0xFF>; + resets = <&k3_reset 143 1>; + }; };