From: Frieder Schrempf frieder.schrempf@kontron.de
LDO5 has two separate control registers. LDO5CTRL_L is used if the input signal SD_VSEL is low and LDO5CTRL_H if it is high. The current driver implementation only uses LDO5CTRL_H. To make this work on boards that have SD_VSEL connected to a GPIO, we add support for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have SD_VSEL set to a fixed low level. In this case we need to change the driver to be able to use the LDO5CTRL_L register.
This is a port of the same change in the Linux kernel: 8c67a11bae88 ("regulator: pca9450: Add SD_VSEL GPIO for LDO5")
Signed-off-by: Frieder Schrempf frieder.schrempf@kontron.de --- drivers/power/pmic/pca9450.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c index 116ac49a8db..6b9befba18c 100644 --- a/drivers/power/pmic/pca9450.c +++ b/drivers/power/pmic/pca9450.c @@ -7,9 +7,12 @@ #include <fdtdec.h> #include <errno.h> #include <dm.h> +#include <dm/device_compat.h> #include <i2c.h> +#include <linux/err.h> #include <log.h> #include <asm/global_data.h> +#include <asm-generic/gpio.h> #include <power/pmic.h> #include <power/regulator.h> #include <power/pca9450.h> @@ -26,6 +29,10 @@ static const struct pmic_child_info pmic_children_info[] = { { }, };
+struct pca9450_priv { + struct gpio_desc *sd_vsel_gpio; +}; + static int pca9450_reg_count(struct udevice *dev) { return PCA9450_REG_NUM; @@ -76,6 +83,24 @@ static int pca9450_bind(struct udevice *dev) return 0; }
+static int pca9450_probe(struct udevice *dev) +{ + struct pca9450_priv *priv = dev_get_priv(dev); + int ret = 0; + + if (IS_ENABLED(CONFIG_DM_GPIO) && IS_ENABLED(CONFIG_DM_REGULATOR_PCA9450)) { + priv->sd_vsel_gpio = devm_gpiod_get_optional(dev, "sd-vsel", + GPIOD_IS_OUT | + GPIOD_IS_OUT_ACTIVE); + if (IS_ERR(priv->sd_vsel_gpio)) { + ret = PTR_ERR(priv->sd_vsel_gpio); + dev_err(dev, "Failed to request SD_VSEL GPIO: %d\n", ret); + } + } + + return ret; +} + static struct dm_pmic_ops pca9450_ops = { .reg_count = pca9450_reg_count, .read = pca9450_read, @@ -94,5 +119,7 @@ U_BOOT_DRIVER(pmic_pca9450) = { .id = UCLASS_PMIC, .of_match = pca9450_ids, .bind = pca9450_bind, + .probe = pca9450_probe, .ops = &pca9450_ops, + .priv_auto = sizeof(struct pca9450_priv), };