Jean-Christophe PLAGNIOL-VILLARD schrieb:
On 12:15 Wed 22 Apr , Daniel Gorsulowski wrote:
Hello Jean-Christophe,
I'm not sure, but I think there is a bug in your new at91 clock framework. My board does only boot, if CONFIG_USB_ATMEL is defined. But the board does not have any usb-ports, so there is no need to define CONFIG_USB_ATMEL. The board is based on an Atmel AT91SAM9263 SoC.
I've seen in with the one on my clock branch but if you use the one for the pull request normaly not
I've test it on my 9263EK
Best Regards, J.
I'm working on git://git.denx.de/u-boot-at91.git branch clock I also have an AT91SAM9263-EK, but with a 16.0 MHz main oscillator. Everything is fine, as long as no changes were made. But if I undef CONFIG_USB_ATMEL and CONFIG_CMD_USB, the board does not boot. Only some cryptical characters appear after the "RomBOOT" term. It's the same behavior as on my own board.
If i do the same on git://git.denx.de/u-boot.git branch master, everything works fine. (as well AT91SAM9263-EK as my board) Do you have any advice for debugging that problem?
Best regards, Daniel Gorsulowski