If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias.
Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2.
In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one.
Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers.
Signed-off-by: Michael Walle michael@walle.cc Reviewed-by: Alex Marginean alexandru.marginean@nxp.com Tested-by: Alex Marginean alexandru.marginean@nxp.com Acked-by: Vladimir Oltean olteanv@gmail.com Reviewed-by: Simon Glass sjg@chromium.org Tested-by: Michal Simek michal.simek@xilinx.com [on zcu102-revA] --- arch/sandbox/dts/test.dts | 4 ++-- drivers/core/uclass.c | 21 +++++++++++++++------ include/configs/sandbox.h | 6 +++--- test/dm/eth.c | 14 +++++++------- test/dm/test-fdt.c | 22 +++++++++++++++++----- 5 files changed, 44 insertions(+), 23 deletions(-)
Applied to u-boot-dm, thanks!