On 2024/11/6 05:51, Jonas Karlman wrote:
Migrate to use TPL, common bss, stack and malloc heap size and addresses to unify memory use in TPL, SPL and pre-reloc.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/mach-rockchip/rk3288/Kconfig | 2 ++ configs/miqi-rk3288_defconfig | 15 ++------------- 2 files changed, 4 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index 672d634f7fb5..ff16d258b4f5 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -86,6 +86,8 @@ config TARGET_FIREFLY_RK3288 config TARGET_MIQI_RK3288 bool "MiQi-RK3288" select BOARD_LATE_INIT
- select ROCKCHIP_COMMON_STACK_ADDR
- select TPL help MiQi-RK3288 is a RK3288-based development board with 4 USB 2.0 ports, HDMI, micro-SD card, 16 GB eMMC and Gigabit Ethernet. It
diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index 764b4351e94c..2bb8bf2ac060 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -1,24 +1,15 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00000000 +CONFIG_TEXT_BASE=0x01000000 CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi" -CONFIG_SPL_TEXT_BASE=0xff704000 CONFIG_DM_RESET=y -CONFIG_SYS_MONITOR_LEN=614400 CONFIG_ROCKCHIP_RK3288=y -CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_MIQI_RK3288=y -CONFIG_SPL_STACK_R_ADDR=0x80000 -CONFIG_SPL_STACK=0xff718000 -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART_BASE=0xff690000 @@ -31,8 +22,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_NO_BSS_LIMIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y