All,
I have downloaded the latest U-boot 1.3.0 dirty <a week old> and compiled it up for a 8360E-MDS board. I have downloaded the latest version of the DTC 1.0.0-ge1109207 today, and compiled up a preconfigured dts file and burnt that into flash. Also I have downloaded denx's latest linux-git tree 2.6.23.1 and configured it for said board.
However, when I try to boot Linux, I get an immediate error as follows:
bootm $kerneladdr - $blobaddr
.. Bla bla standard printf..
Uncompressing the Kernel Image . OK Booting using the fdt at 0xe0080000 Loading device tree to 0x007fe000, end 0x007ff432 . ERROR: fdt move failed - must reset board to recover. Resetting the board.
I am coming at this from my experience with U-boot 1.1.2 and 1.1.6 and a 1 yr old version of the dtc compiler. Are there new options, or less options that should be used with the dtc compiler to avoid this error? I know before we had to fix the version of the blob, so perhaps I am compiling the blob wrong? The dts file compiles fine with no warnings.
dtc -I dts -O dtb -f -V 0x10
Using this without -V 0x10 gives me a different error dtc -I dts -O dtb -f
WARNING: could not create /chosen FDT_ERR_NOSPACE ERROR: /chosen node create failed - must RESET the board to recover
Anybody have any ideas?