Rename this so that SPL is first, as per U-Boot convention. Also add PAYLOAD_ since this is where in memory the parameters for the payload have been stored.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v2)
Changes in v2: - Rename based on Tom's feedback
arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 2 +- common/spl/Kconfig | 2 +- common/spl/spl.c | 8 ++++---- common/spl/spl_ext.c | 4 ++-- common/spl/spl_fat.c | 4 ++-- common/spl/spl_mmc.c | 2 +- common/spl/spl_nand.c | 10 +++++----- common/spl/spl_nor.c | 8 ++++---- common/spl/spl_spi.c | 2 +- common/spl/spl_ubi.c | 2 +- common/spl/spl_xip.c | 2 +- configs/am3517_evm_defconfig | 2 +- configs/devkit8000_defconfig | 2 +- configs/display5_defconfig | 2 +- configs/display5_factory_defconfig | 2 +- configs/gwventana_emmc_defconfig | 2 +- configs/gwventana_nand_defconfig | 2 +- configs/igep00x0_defconfig | 2 +- configs/imx28_xea_defconfig | 2 +- configs/imx6dl_mamoj_defconfig | 2 +- configs/imx6q_logic_defconfig | 2 +- configs/imx6qdl_icore_mipi_defconfig | 2 +- configs/imx6qdl_icore_mmc_defconfig | 2 +- configs/imx6qdl_icore_rqs_defconfig | 2 +- configs/ls1046ardb_qspi_spl_defconfig | 2 +- configs/mccmon6_nor_defconfig | 2 +- configs/omap35_logic_defconfig | 2 +- configs/omap35_logic_somlv_defconfig | 2 +- configs/omap3_logic_defconfig | 2 +- configs/omap3_logic_somlv_defconfig | 2 +- configs/riotboard_defconfig | 2 +- configs/stm32746g-eval_spl_defconfig | 2 +- configs/stm32f746-disco_spl_defconfig | 2 +- configs/stm32f769-disco_spl_defconfig | 2 +- configs/syzygy_hub_defconfig | 2 +- configs/vyasa-rk3288_defconfig | 2 +- configs/xilinx_zynq_virt_defconfig | 2 +- configs/xilinx_zynqmp_virt_defconfig | 2 +- doc/develop/falcon.rst | 2 +- 39 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon index b3c6693a42c2..2bbe4e2d1235 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon @@ -30,7 +30,7 @@ to understand the device tree in FIT image should be the one actually used, or leave it absent to favor the stored sectors. It is easier to deploy the FIT image with embedded static device tree to multiple boards.
-Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load +Macro CONFIG_SPL_PAYLOAD_ARGS_ADDR serves two purposes. One is the pointer to load the stored sectors to. Normally this is the static device tree. The second purpose is the memory location of signature header for secure boot. After the FIT image is loaded into memory, it is validated against the signature header diff --git a/common/spl/Kconfig b/common/spl/Kconfig index b9d96fbe1355..463235979427 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1063,7 +1063,7 @@ config SPL_OS_BOOT Enable booting directly to an OS from SPL. for more info read doc/README.falcon
-config SYS_SPL_ARGS_ADDR +config SPL_PAYLOAD_ARGS_ADDR hex "Address in memory to load 'args' file for Falcon Mode to" depends on SPL_OS_BOOT default 0x88000000 if ARCH_OMAP2PLUS diff --git a/common/spl/spl.c b/common/spl/spl.c index 171dfbcf703c..657886dfe5b0 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -818,8 +818,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) }
memset(&spl_image, '\0', sizeof(spl_image)); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; +#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR + spl_image.arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; #endif spl_image.boot_device = BOOT_DEVICE_NONE; board_boot_order(spl_boot_list); @@ -877,8 +877,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) #if CONFIG_IS_ENABLED(OS_BOOT) case IH_OS_LINUX: debug("Jumping to Linux\n"); -#if defined(CONFIG_SYS_SPL_ARGS_ADDR) - spl_fixup_fdt((void *)CONFIG_SYS_SPL_ARGS_ADDR); +#if defined(CONFIG_SPL_PAYLOAD_ARGS_ADDR) + spl_fixup_fdt((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); #endif spl_board_prepare_for_linux(); jump_to_image_linux(&spl_image); diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index 2bf34344391c..902564a60776 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -97,7 +97,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, puts("spl: ext4fs_open failed\n"); goto defaults; } - err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -127,7 +127,7 @@ defaults: if (err < 0) puts("spl: ext4fs_open failed\n");
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index f8a5b80a3bd2..c6e2526ade12 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -128,7 +128,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image, #if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT) file = env_get("falcon_args_file"); if (file) { - err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + err = file_fat_read(file, (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -153,7 +153,7 @@ defaults: #endif
err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 20f687e13891..0ab85d2168c1 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -235,7 +235,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image, count = blk_dread(mmc_get_blk_desc(mmc), CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, - (void *) CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); if (count != CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("mmc_load_image_raw_os: mmc block read error\n"); diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index dc45204fc0e6..6cc34004f49d 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -159,11 +159,11 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, CONFIG_CMD_SPL_WRITE_SIZE, (void *)CONFIG_TEXT_BASE); /* copy to destintion */ - for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR, - src = (int *)CONFIG_TEXT_BASE; - src < (int *)(CONFIG_TEXT_BASE + - CONFIG_CMD_SPL_WRITE_SIZE); - src++, dst++) { + for (dst = (int *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, + src = (int *)CONFIG_TEXT_BASE; + src < (int *)(CONFIG_TEXT_BASE + + CONFIG_CMD_SPL_WRITE_SIZE); + src++, dst++) { writel(readl(src), dst); }
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index 5b65b96a77db..79d4f1d7aa87 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -54,8 +54,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, CONFIG_SYS_OS_BASE, (void *)header);
-#if defined CONFIG_SYS_SPL_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS - memcpy((void *)CONFIG_SYS_SPL_ARGS_ADDR, +#if defined CONFIG_SPL_PAYLOAD_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS + memcpy((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, (void *)CONFIG_CMD_SPL_NOR_OFS, CONFIG_CMD_SPL_WRITE_SIZE); #endif @@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, (void *)(CONFIG_SYS_OS_BASE + sizeof(struct legacy_img_hdr)), spl_image->size); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; +#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; #endif
return 0; diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index 2aff025f76ee..d69069a75bfe 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -47,7 +47,7 @@ static int spi_load_image_os(struct spl_image_info *spl_image, /* Read device tree. */ spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, CFG_SYS_SPI_ARGS_SIZE, - (void *)CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
return 0; } diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c index bcac25cd021c..d7ab9efd1108 100644 --- a/common/spl/spl_ubi.c +++ b/common/spl/spl_ubi.c @@ -50,7 +50,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image, volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_KERNEL_ID; volumes[0].load_addr = (void *)CONFIG_SYS_LOAD_ADDR; volumes[1].vol_id = CONFIG_SPL_UBI_LOAD_ARGS_ID; - volumes[1].load_addr = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + volumes[1].load_addr = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR;
ret = ubispl_load_volumes(&info, volumes, 2); if (!ret) { diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c index 77c23ba05978..959915ffa610 100644 --- a/common/spl/spl_xip.c +++ b/common/spl/spl_xip.c @@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image, { #if CONFIG_IS_ENABLED(OS_BOOT) if (!spl_start_uboot()) { - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; spl_image->name = "Linux"; spl_image->os = IH_OS_LINUX; spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index dda235492784..7b449c703b6c 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -33,7 +33,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 1431e54dc95e..ef16da176a91 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -28,7 +28,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80000100 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80000100 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500 diff --git a/configs/display5_defconfig b/configs/display5_defconfig index 9c4334af15c5..00b6f692e3d9 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -46,7 +46,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SAVEENV=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 7622035a588a..6e6143cb2e0f 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -41,7 +41,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 021c87a9ce18..300eb3cc75a4 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 28893d843851..83aa1ae2cb83 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x1200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index a6dce15c3a08..993bbe29c6b8 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index cef7352ad88f..c1b0487f7ea7 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y CONFIG_SPL_MMC_TINY=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x44000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x44000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400 diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index 933a9d83f344..35ded27c8355 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -20,7 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index b307fea5f25c..71d6bf0e114c 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index ecb8fb2ba57b..59c3da32dce4 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -36,7 +36,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 42889188cc30..836b3d1814d1 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -39,7 +39,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 2ab42979fa60..aa44cdc52d9e 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -33,7 +33,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 78f1185ec68b..84bd1b1d0f49 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -61,7 +61,7 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x90000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x90000000 CONFIG_SYS_OS_BASE=0x40980000 CONFIG_SPL_WATCHDOG=y CONFIG_SPL_TARGET="spl/u-boot-spl.pbl" diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 88a72b392993..5e8fbd01bf9e 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_OS_BASE=0x8180000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index 3534753dd3e1..990f05c72e50 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index a88fd5550287..bf139e7fde4e 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -38,7 +38,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index e747a0c1e932..48a87722d5ea 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index aaac431615ce..12bfe5b1c1da 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -38,7 +38,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index f8bc8c639692..6ab405d7f98d 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig index 03e123e44a2e..8b60365cc24e 100644 --- a/configs/stm32746g-eval_spl_defconfig +++ b/configs/stm32746g-eval_spl_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index 84aaec1e3390..0a3042b3279a 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig index dd17cad73622..f570cbbe73aa 100644 --- a/configs/stm32f769-disco_spl_defconfig +++ b/configs/stm32f769-disco_spl_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 7bcb3191000e..78cbaa7a0b83 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2071 CONFIG_SYS_BOOTM_LEN=0x3c00000 diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 9bca6fe2eeaa..0ae901a72391 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0xffe5000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8000 diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index 16c127b7400b..817fb4142d18 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SYS_MAXARGS=32 diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 51e0d254f4ac..b284494092ac 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub" CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x8000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index a569d1a29517..2f25fc8532f5 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -63,7 +63,7 @@ CONFIG_CMD_SPL Enable the "spl export" command. The command "spl export" is then available in U-Boot mode.
-CONFIG_SYS_SPL_ARGS_ADDR +CONFIG_SPL_PAYLOAD_ARGS_ADDR Address in RAM where the parameters must be copied by SPL. In most cases, it is <start_of_ram> + 0x100.