From: Yuantian Tang andy.tang@nxp.com
Remove the old implementation in order to enable DM for sata
Signed-off-by: Tang Yuantian andy.tang@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 54 ------------------------ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 32 -------------- 2 files changed, 0 insertions(+), 86 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index bfd6639..8028d52 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -6,8 +6,6 @@ #include <common.h> #include <fsl_immap.h> #include <fsl_ifc.h> -#include <ahci.h> -#include <scsi.h> #include <asm/arch/fsl_serdes.h> #include <asm/arch/soc.h> #include <asm/io.h> @@ -330,36 +328,6 @@ void fsl_lsch3_early_init_f(void) #endif }
-#ifdef CONFIG_SCSI_AHCI_PLAT -int sata_init(void) -{ - struct ccsr_ahci __iomem *ccsr_ahci; - -#ifdef CONFIG_SYS_SATA2 - ccsr_ahci = (void *)CONFIG_SYS_SATA2; - out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); - out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); - out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); - out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); - out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); -#endif - -#ifdef CONFIG_SYS_SATA1 - ccsr_ahci = (void *)CONFIG_SYS_SATA1; - out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); - out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); - out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); - out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); - out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); - - ahci_init((void __iomem *)CONFIG_SYS_SATA1); - scsi_scan(false); -#endif - - return 0; -} -#endif - /* Get VDD in the unit mV from voltage ID */ int get_core_volt_from_fuse(void) { @@ -400,25 +368,6 @@ int get_core_volt_from_fuse(void) }
#elif defined(CONFIG_FSL_LSCH2) -#ifdef CONFIG_SCSI_AHCI_PLAT -int sata_init(void) -{ - struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA; - - /* Disable SATA ECC */ - out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000); - out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); - out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); - out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); - out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); - out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); - - ahci_init((void __iomem *)CONFIG_SYS_SATA); - scsi_scan(false); - - return 0; -} -#endif
static void erratum_a009929(void) { @@ -719,9 +668,6 @@ int qspi_ahb_init(void) #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { -#ifdef CONFIG_SCSI_AHCI_PLAT - sata_init(); -#endif #ifdef CONFIG_CHAIN_OF_TRUST fsl_setenv_chain_of_trust(); #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 9a219a6..6e3a420 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -85,39 +85,7 @@ struct cpu_type { #define SVR_DEV(svr) ((svr) >> 8) #define IS_SVR_DEV(svr, dev) (((svr) >> 16) == (dev))
-/* ahci port register default value */ -#define AHCI_PORT_PHY_1_CFG 0xa003fffe -#define AHCI_PORT_PHY2_CFG 0x28184d1f -#define AHCI_PORT_PHY3_CFG 0x0e081509 -#define AHCI_PORT_TRANS_CFG 0x08000029 -#define AHCI_PORT_AXICC_CFG 0x3fffffff - #ifndef __ASSEMBLY__ -/* AHCI (sata) register map */ -struct ccsr_ahci { - u32 res1[0xa4/4]; /* 0x0 - 0xa4 */ - u32 pcfg; /* port config */ - u32 ppcfg; /* port phy1 config */ - u32 pp2c; /* port phy2 config */ - u32 pp3c; /* port phy3 config */ - u32 pp4c; /* port phy4 config */ - u32 pp5c; /* port phy5 config */ - u32 axicc; /* AXI cache control */ - u32 paxic; /* port AXI config */ - u32 axipc; /* AXI PROT control */ - u32 ptc; /* port Trans Config */ - u32 pts; /* port Trans Status */ - u32 plc; /* port link config */ - u32 plc1; /* port link config1 */ - u32 plc2; /* port link config2 */ - u32 pls; /* port link status */ - u32 pls1; /* port link status1 */ - u32 pcmdc; /* port CMD config */ - u32 ppcs; /* port phy control status */ - u32 pberr; /* port 0/1 BIST error */ - u32 cmds; /* port 0/1 CMD status error */ -}; - #ifdef CONFIG_FSL_LSCH3 void fsl_lsch3_early_init_f(void); int get_core_volt_from_fuse(void);