This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/Kconfig | 6 - board/vpac270/Kconfig | 9 -- board/vpac270/MAINTAINERS | 8 - board/vpac270/Makefile | 13 -- board/vpac270/onenand.c | 46 ------ board/vpac270/u-boot-spl.lds | 81 ---------- board/vpac270/vpac270.c | 126 --------------- configs/vpac270_nor_128_defconfig | 6 - configs/vpac270_nor_256_defconfig | 6 - configs/vpac270_ond_256_defconfig | 8 - include/configs/vpac270.h | 325 -------------------------------------- 11 files changed, 634 deletions(-) delete mode 100644 board/vpac270/Kconfig delete mode 100644 board/vpac270/MAINTAINERS delete mode 100644 board/vpac270/Makefile delete mode 100644 board/vpac270/onenand.c delete mode 100644 board/vpac270/u-boot-spl.lds delete mode 100644 board/vpac270/vpac270.c delete mode 100644 configs/vpac270_nor_128_defconfig delete mode 100644 configs/vpac270_nor_256_defconfig delete mode 100644 configs/vpac270_ond_256_defconfig delete mode 100644 include/configs/vpac270.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1a440b7..da58c27 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -709,11 +709,6 @@ config TARGET_PALMTREO680 select CPU_PXA select SUPPORT_SPL
-config TARGET_VPAC270 - bool "Support vpac270" - select CPU_PXA - select SUPPORT_SPL - config TARGET_XAENIAX bool "Support xaeniax" select CPU_PXA @@ -880,7 +875,6 @@ source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" source "board/udoo/Kconfig" -source "board/vpac270/Kconfig" source "board/vscom/baltos/Kconfig" source "board/wandboard/Kconfig" source "board/warp/Kconfig" diff --git a/board/vpac270/Kconfig b/board/vpac270/Kconfig deleted file mode 100644 index 1701b35..0000000 --- a/board/vpac270/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_VPAC270 - -config SYS_BOARD - default "vpac270" - -config SYS_CONFIG_NAME - default "vpac270" - -endif diff --git a/board/vpac270/MAINTAINERS b/board/vpac270/MAINTAINERS deleted file mode 100644 index 1c62765..0000000 --- a/board/vpac270/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -VPAC270 BOARD -M: Marek Vasut marek.vasut@gmail.com -S: Maintained -F: board/vpac270/ -F: include/configs/vpac270.h -F: configs/vpac270_nor_128_defconfig -F: configs/vpac270_nor_256_defconfig -F: configs/vpac270_ond_256_defconfig diff --git a/board/vpac270/Makefile b/board/vpac270/Makefile deleted file mode 100644 index ad7f7d8..0000000 --- a/board/vpac270/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Voipac PXA270 Support -# -# Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifndef CONFIG_SPL_BUILD -obj-y := vpac270.o -else -obj-y := onenand.o -endif diff --git a/board/vpac270/onenand.c b/board/vpac270/onenand.c deleted file mode 100644 index a749b31..0000000 --- a/board/vpac270/onenand.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Voipac PXA270 OneNAND SPL - * - * Copyright (C) 2011 Marek Vasut marek.vasut@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include <onenand_uboot.h> -#include <asm/arch/pxa.h> - -void board_init_f(unsigned long unused) -{ - extern uint32_t _end; - uint32_t tmp; - - asm volatile("mov %0, pc" : "=r"(tmp)); - tmp >>= 24; - - /* The code runs from OneNAND RAM, copy SPL to SRAM and execute it. */ - if (tmp == 0) { - tmp = (uint32_t)&_end - CONFIG_SPL_TEXT_BASE; - onenand_spl_load_image(0, tmp, (void *)CONFIG_SPL_TEXT_BASE); - asm volatile("mov pc, %0" : : "r"(CONFIG_SPL_TEXT_BASE)); - } - - /* Hereby, the code runs from (S)RAM, copy U-Boot and execute it. */ - arch_cpu_init(); - pxa2xx_dram_init(); - onenand_spl_load_image(CONFIG_SPL_ONENAND_LOAD_ADDR, - CONFIG_SPL_ONENAND_LOAD_SIZE, - (void *)CONFIG_SYS_TEXT_BASE); - asm volatile("mov pc, %0" : : "r"(CONFIG_SYS_TEXT_BASE)); - - for (;;) - ; -} - -void __attribute__((noreturn)) hang(void) -{ - for (;;) - ; -} diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds deleted file mode 100644 index 954afb9..0000000 --- a/board/vpac270/u-boot-spl.lds +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2011 Marek Vasut marek.vasut@gmail.com - * on behalf of DENX Software Engineering GmbH - * - * January 2004 - Changed to support H4 device - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = CONFIG_SPL_TEXT_BASE; - .text.0 : - { - *(.vectors) - arch/arm/cpu/pxa/start.o (.text*) - arch/arm/lib/built-in.o (.text*) - board/vpac270/built-in.o (.text*) - drivers/built-in.o (.text*) - } - - - /* Start of the rest of the SPL */ - . = CONFIG_SPL_TEXT_BASE + 0x800; - - .text.1 : - { - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - . = ALIGN(0x800); - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c deleted file mode 100644 index 8d777df..0000000 --- a/board/vpac270/vpac270.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Voipac PXA270 Support - * - * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/regs-mmc.h> -#include <asm/arch/pxa.h> -#include <netdev.h> -#include <serial.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* Arch number of vpac270 */ - gd->bd->bi_arch_number = MACH_TYPE_VPAC270; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int dram_init(void) -{ -#ifndef CONFIG_ONENAND - pxa2xx_dram_init(); -#endif - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - -#ifdef CONFIG_RAM_256M - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -#endif -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - /* enable port 2 */ - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} -#endif - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif diff --git a/configs/vpac270_nor_128_defconfig b/configs/vpac270_nor_128_defconfig deleted file mode 100644 index 1d11653..0000000 --- a/configs/vpac270_nor_128_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_128M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vpac270_nor_256_defconfig b/configs/vpac270_nor_256_defconfig deleted file mode 100644 index bcd1006..0000000 --- a/configs/vpac270_nor_256_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_256M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vpac270_ond_256_defconfig b/configs/vpac270_ond_256_defconfig deleted file mode 100644 index d989819..0000000 --- a/configs/vpac270_ond_256_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="ONENAND,RAM_256M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h deleted file mode 100644 index 976ba5d..0000000 --- a/include/configs/vpac270.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - * Voipac PXA270 configuration file - * - * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_VPAC270 1 /* Voipac PXA270 board */ -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#ifdef CONFIG_ONENAND -#define CONFIG_SPL_ONENAND_SUPPORT -#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000 -#define CONFIG_SPL_ONENAND_LOAD_SIZE \ - (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR) -#define CONFIG_SPL_TEXT_BASE 0x5c000000 -#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds" -#endif - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "if ide reset && fatload ide 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "bootm 0x60000;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_onenand=" \ - "onenand erase 0x0 0x80000 ; " \ - "onenand write 0xa0000000 0x0 0x80000" - -#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#undef CONFIG_LCD -#define CONFIG_CMD_IDE - -#ifdef CONFIG_ONENAND -#define CONFIG_CMD_ONENAND -#else -#undef CONFIG_CMD_ONENAND -#endif - -/* - * Networking Configuration - * chip on the Voipac PXA270 board - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ -#define DM9000_IO (CONFIG_DM9000_BASE) -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#endif - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#ifdef CONFIG_SYS_HUSH_PARSER -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ - - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#ifdef CONFIG_RAM_256M -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#endif - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */ -#else -#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 - -/* - * NOR FLASH - */ -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -#if defined(CONFIG_CMD_FLASH) /* NOR */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#ifdef CONFIG_RAM_256M -#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ -#endif - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } -#else -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#endif - -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 - -#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ONENAND_BASE 0x00000000 - -#define CONFIG_ENV_IS_IN_ONENAND 1 - -#else /* No flash */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -/* - * IDE - */ -#ifdef CONFIG_CMD_IDE -#define CONFIG_LBA48 -#undef CONFIG_IDE_LED -#undef CONFIG_IDE_RESET - -#define __io - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x120 -#define CONFIG_SYS_ATA_REG_OFFSET 0x120 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x120 - -#define CONFIG_SYS_ATA_STRIDE 2 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x01308800 -#define CONFIG_SYS_GPSR1_VAL 0x00cf0000 -#define CONFIG_SYS_GPSR2_VAL 0x922ac000 -#define CONFIG_SYS_GPSR3_VAL 0x0161e800 - -#define CONFIG_SYS_GPCR0_VAL 0x00010000 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xcbb18800 -#define CONFIG_SYS_GPDR1_VAL 0xfccfa981 -#define CONFIG_SYS_GPDR2_VAL 0x922affff -#define CONFIG_SYS_GPDR3_VAL 0x0161e904 - -#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510 -#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401 -#define CONFIG_SYS_GAFR3_L_VAL 0x54010310 -#define CONFIG_SYS_GAFR3_U_VAL 0x00025401 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00500240 -#define CONFIG_SYS_CCCR 0x02000290 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x3ffc95f9 -#define CONFIG_SYS_MSC1_VAL 0x02ccf974 -#define CONFIG_SYS_MSC2_VAL 0x00000000 -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3 -#else -#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3 -#endif -#define CONFIG_SYS_MDREFR_VAL 0x201fe01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270" -#define CONFIG_USB_STORAGE -#endif - -#endif /* __CONFIG_H */