On 10/7/22 11:38, Mattijs Korpershoek wrote:
When host issues "fastboot reboot fastboot", it's expected that the board drops the USB connection before resetting.
On some boards, such as Khadas VIM3L and SEI610, this is not the case.
We observe the following error: $ fastboot reboot fastboot Rebooting into fastboot OKAY [ 0.004s] fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
This does not happen when we use the RST button on the board. It can be reproduced in linux with: # echo b > /proc/sysrq-trigger
In this case, we hit a undefined hardware behavior, where D+ and D- are in an unknown state. Therefore the host can't detect usb disconnection.
Make sure we always call usb_gadget_release() when a "fastboot reboot" command is issued.
Note: usb_gadget_release() should be called before g_dnl_unregister() because g_dnl_unregister() triggers a complete() call on each endpoint (thus calling do_reset()).
Applied to usb/master , thanks