Hi Fabio,
On 6/18/21 4:19 AM, Fabio Estevam wrote:
Hi Peng,
On Mon, Jun 14, 2021 at 9:23 PM Peng Fan (OSS) peng.fan@oss.nxp.com wrote:
Do you have a chance to see where it consumes so much time?
Here is the place it consumes too much time. Here is an example on a warp7 board:
U-Boot 2021.07-rc3 (Jun 17 2021 - 18:30:37 +0000)
CPU: Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Reset cause: POR Model: Warp i.MX7 Board Board: WARP7 in secure mode OPTEE DRAM 0x9d000000-0xa0000000 DRAM: 464 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 3, FSL_SDHC: 0 Loading Environment from MMC... (takes 10 seconds to continue) OK
Can we go with the revert to avoid such regression?
I think that this patch can be applied. Because it's too late to boot.
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung