Hi, Thank you for re-submitting the patchset!
On Thu, Feb 2, 2012 at 2:42 PM, Manjunath Hadli manjunath.hadli@ti.com wrote:
There are two da850 SOC based EVMs, one from Spectrum digital and other from Logic PD. Boards from Spectrum digital have mac address stored in I2C EEPROM and they have spi flash manufactured by WINBOND. Boards from Logic PD store mac address in ST Microelectronics SPI flash. This patch series adds support to read mac address from the appropriate device.
Ok, so we have two configurations, we have da850evm which is for LogicPD's OMAP-L138 SoM and for LogicPD's AM1808 SoM, and we have da850_am18xxevm which must be used for the AM1808 board from Spectrum Digital. Is that correct?
I wonder if we should change the name of the da850_am18xxevm configuration. It's quite confusing, until today I thought that the da850_am18xxevm was a configuration for LogicPD's AM1808 SoM... Are there also OMAP-L138 boards from Spectrum Digital?
Regards, Christian
These patches have undergone a review previously, but since the tree has moved ahead Christian and Tom asked to resubmit the patches for review. (http://www.mail-archive.com/u-boot@lists.denx.de/msg76220.html)
Manjunath Hadli (2): da850evm: add support to read mac address from spi flash da850evm: read mac address from I2C EEPROM on AM18x EVM
board/davinci/da8xxevm/da850evm.c | 66 +++++++++++++++++++++++++++++++++++++ boards.cfg | 4 +- 2 files changed, 68 insertions(+), 2 deletions(-)
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot