According to coldfire manual data timeout > address time out also use correct macro to program XARB_CFG
Signed-off-by: Arun C arunedarath@mistralsolutions.com --- cpu/mcf547x_8x/cpu_init.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c index 1ba5783..96a3132 100644 --- a/cpu/mcf547x_8x/cpu_init.c +++ b/cpu/mcf547x_8x/cpu_init.c @@ -49,14 +49,14 @@ void cpu_init_f(void) volatile xlbarb_t *xlbarb = (volatile xlbarb_t *) MMAP_XARB;
xlbarb->adrto = 0x2000; - xlbarb->datto = 0x2000; + xlbarb->datto = 0x2500; xlbarb->busto = 0x3000;
- xlbarb->cfg = XARB_SR_AT | XARB_SR_DT; + xlbarb->cfg = XARB_CFG_AT | XARB_CFG_DT;
/* Master Priority Enable */ - xlbarb->pri = 0; xlbarb->prien = 0xff; + xlbarb->pri = 0;
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) fbcs->csar0 = CONFIG_SYS_CS0_BASE;