19 Sep
2009
19 Sep
'09
2 a.m.
diff --git a/cpu/mpc85xx/cpu_init_nand.c
+void cpu_init_f(void) +{
- ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- /*
* LCRR - Clock Ratio Register - set up local bus timing* when needed*/- out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
+#if defined(CONFIG_NAND_BR_PRELIM) \
- && defined(CONFIG_NAND_OR_PRELIM)
- out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
- out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
- /* for FPGA */
- out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
- out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
+#else +#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must
be defined
+#endif
Should we not have br/or1, br/or2, etc?
And FPGA stuff put here cpu/mpc85xx..... It is *not* good practice and should be move out from here. I know the FPGA is for UART clock.