I actually work with Peter at Logic PD. If he doesn't want to continue to be the maintainer, I can take that over. I know he is busy.
Thank you,
adam
On Mon, Aug 31, 2015 at 8:59 AM, Tom Rini trini@konsulko.com wrote:
On Mon, Aug 31, 2015 at 08:47:16AM -0500, Adam Ford wrote:
If I add the one-line patch to add generic support, can we keep this in there for the short term? I am working on more patches to both the
Kernel
and U-boot but I haven't pushed them for approvals yet.
Adding Peter. Yes. And you may want to check with Peter if he wants to continue to be the maintainer of record for the board. Thanks!
adam
On Sun, Aug 30, 2015 at 8:19 PM, Simon Glass sjg@chromium.org wrote:
This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org
arch/arm/cpu/armv7/omap3/Kconfig | 4 - board/logicpd/omap3som/Kconfig | 12 -- board/logicpd/omap3som/MAINTAINERS | 6 - board/logicpd/omap3som/Makefile | 8 - board/logicpd/omap3som/omap3logic.c | 242 --------------------------- board/logicpd/omap3som/omap3logic.h | 31 ---- configs/omap3_logic_defconfig | 8 - include/configs/omap3_logic.h | 322
8 files changed, 633 deletions(-) delete mode 100644 board/logicpd/omap3som/Kconfig delete mode 100644 board/logicpd/omap3som/MAINTAINERS delete mode 100644 board/logicpd/omap3som/Makefile delete mode 100644 board/logicpd/omap3som/omap3logic.c delete mode 100644 board/logicpd/omap3som/omap3logic.h delete mode 100644 configs/omap3_logic_defconfig delete mode 100644 include/configs/omap3_logic.h
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 336da53..9665c95 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -87,9 +87,6 @@ config TARGET_MCX bool "MCX" select SUPPORT_SPL
-config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"config TARGET_OMAP3_MVBLX bool "OMAP3 MVBLX"
@@ -139,7 +136,6 @@ source "board/pandora/Kconfig" source "board/8dtech/eco5pk/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" -source "board/logicpd/omap3som/Kconfig" source "board/matrix_vision/mvblx/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig deleted file mode 100644 index 03d272a..0000000 --- a/board/logicpd/omap3som/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_LOGIC
-config SYS_BOARD
default "omap3som"-config SYS_VENDOR
default "logicpd"-config SYS_CONFIG_NAME
default "omap3_logic"-endif diff --git a/board/logicpd/omap3som/MAINTAINERS b/board/logicpd/omap3som/MAINTAINERS deleted file mode 100644 index ffe2201..0000000 --- a/board/logicpd/omap3som/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OMAP3SOM BOARD -M: Peter Barada peter.barada@logicpd.com -S: Maintained -F: board/logicpd/omap3som/ -F: include/configs/omap3_logic.h -F: configs/omap3_logic_defconfig diff --git a/board/logicpd/omap3som/Makefile b/board/logicpd/omap3som/Makefile deleted file mode 100644 index 87b86ad..0000000 --- a/board/logicpd/omap3som/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -#
-obj-y := omap3logic.o diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c deleted file mode 100644 index 609edf1..0000000 --- a/board/logicpd/omap3som/omap3logic.c +++ /dev/null @@ -1,242 +0,0 @@ -/*
- (C) Copyright 2011
- Logic Product Development <www.logicpd.com>
- Author :
Peter Barada <peter.barada@logicpd.com>
- Derived from Beagle Board and 3430 SDP code by
Richard Woodruff <r-woodruff2@ti.com>
Syed Mohammed Khasim <khasim@ti.com>
- SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h> -#include <netdev.h> -#include <flash.h> -#include <nand.h> -#include <i2c.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-types.h> -#include "omap3logic.h"
-DECLARE_GLOBAL_DATA_PTR;
-/*
- two dimensional array of strucures containining board name and
Linux
- machine IDs; row it selected based on CPU column is slected based
- on hsusb0_data5 pin having a pulldown resistor
- */
-static struct board_id {
char *name;int machine_id;-} boards[2][2] = {
{{.name = "OMAP35xx SOM LV",.machine_id = MACH_TYPE_OMAP3530_LV_SOM,},{.name = "OMAP35xx Torpedo",.machine_id = MACH_TYPE_OMAP3_TORPEDO,},},{{.name = "DM37xx SOM LV",.machine_id = MACH_TYPE_DM3730_SOM_LV,},{.name = "DM37xx Torpedo",.machine_id = MACH_TYPE_DM3730_TORPEDO,},},-};
-/*
- BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM
LV
- */
-#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
-/*
- Routine: board_init
- Description: Early hardware init.
- */
-int board_init(void) -{
struct board_id *board;unsigned int val;gpmc_init(); /* in SRAM or SDRAM, finish GPMC *//* boot param addr */gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);/** To identify between a SOM LV and Torpedo module,* a pulldown resistor is on hsusb0_data5 for the SOM LVmodule.
* Drive the pin (and let it soak), then read it back.* If the pin is still high its a Torpedo. If low its a SOM LV*//* Mux hsusb0_data5 as a GPIO */MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {/** Drive BOARD_ID_GPIO - the pulldown resistor on theSOM
LV
* will drain the voltage.*/gpio_direction_output(BOARD_ID_GPIO, 0);gpio_set_value(BOARD_ID_GPIO, 1);/* Let it soak for a bit */sdelay(0x100);/** Read state of BOARD_ID_GPIO as an input and if itsset.
* If so the board is a Torpedo*/gpio_direction_input(BOARD_ID_GPIO);val = gpio_get_value(BOARD_ID_GPIO);gpio_free(BOARD_ID_GPIO);board = &boards[!!(get_cpu_family() ==CPU_OMAP36XX)][!!val];
printf("Board: %s\n", board->name);/* Set the machine_id passed to Linux */gd->bd->bi_arch_number = board->machine_id;}/* restore hsusb0_data5 pin as hsusb0_data5 */MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));return 0;-}
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{
return omap_mmc_init(0, 0, 0, -1, -1);-} -#endif
-#if defined(CONFIG_GENERIC_MMC) -void board_mmc_power_init(void) -{
twl4030_power_mmc_init(0);-} -#endif
-#ifdef CONFIG_SMC911X -/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */ -static const u32 gpmc_lan92xx_config[] = {
NET_LAN92XX_GPMC_CONFIG1,NET_LAN92XX_GPMC_CONFIG2,NET_LAN92XX_GPMC_CONFIG3,NET_LAN92XX_GPMC_CONFIG4,NET_LAN92XX_GPMC_CONFIG5,NET_LAN92XX_GPMC_CONFIG6,-};
-int board_eth_init(bd_t *bis) -{
enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],CONFIG_SMC911X_BASE, GPMC_SIZE_16M);return smc911x_initialize(0, CONFIG_SMC911X_BASE);-} -#endif
-/*
- IEN - Input Enable
- IDIS - Input Disable
- PTD - Pull type Down
- PTU - Pull type Up
- DIS - Pull type selection is inactive
- EN - Pull type selection is active
- M0 - Mode 0
- The commented string gives the final mux configuration for that pin
- */
-/*
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers specific
to the
hardware. Many pins need to be moved from protect toprimary
mode.- */
-void set_muxconf_regs(void) -{
/*GPMC*/MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0));MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4));MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1));/*GPMC_IO_DIR*/
MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0));/*Expansion card */MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));/* Serial Console */MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0));MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0));MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0));MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0));/* I2C */MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0));MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0));MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0));/*Control and debug */MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0));MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0));MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0));MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0));MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0));MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));-} diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h deleted file mode 100644 index 3a3ef6e..0000000 --- a/board/logicpd/omap3som/omap3logic.h +++ /dev/null @@ -1,31 +0,0 @@ -/*
- (C) Copyright 2011
- Logic Product Development <www.logicpd.com>
- Author:
- Peter Barada peter.barada@logicpd.com
- SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _OMAP3LOGIC_H_ -#define _OMAP3LOGIC_H_
-/*
- OMAP3 GPMC register settings for CS1 LAN922x
- */
-#define NET_LAN92XX_GPMC_CONFIG1 0x00001000 -#define NET_LAN92XX_GPMC_CONFIG2 0x00080801 -#define NET_LAN92XX_GPMC_CONFIG3 0x00000000 -#define NET_LAN92XX_GPMC_CONFIG4 0x08010801 -#define NET_LAN92XX_GPMC_CONFIG5 0x00080a0a -#define NET_LAN92XX_GPMC_CONFIG6 0x03000280
-const omap3_sysinfo sysinfo = {
DDR_DISCRETE,"Logic DM37x/OMAP35x reference board","NAND",-};
-#endif diff --git a/configs/omap3_logic_defconfig
b/configs/omap3_logic_defconfig
deleted file mode 100644 index 5d0ac9e..0000000 --- a/configs/omap3_logic_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_OMAP3_LOGIC=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -CONFIG_SYS_PROMPT="OMAP Logic # " diff --git a/include/configs/omap3_logic.h
b/include/configs/omap3_logic.h
deleted file mode 100644 index e09e617..0000000 --- a/include/configs/omap3_logic.h +++ /dev/null @@ -1,322 +0,0 @@ -/*
- (C) Copyright 2011 Logic Product Development <www.logicpd.com>
Peter Barada <peter.barada@logicpd.com>
- Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
- reference boards.
- SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H -#define __CONFIG_H
-/*
- High Level Configuration Options
- */
-#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP
boards
*/ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766
-#define CONFIG_SYS_TEXT_BASE 0x80400000
-#define CONFIG_SDRC /* The chip has SDRC controller */
-#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h>
-/*
- Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO
-/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from
T2 */
-#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die
id */
-#define CONFIG_CMDLINE_TAG /* enable passing of
ATAGs
*/ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG
-#define CONFIG_CMDLINE_EDITING /* cmd line
edit/history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */
-/*
- Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128
KiB
*/
/* Sector */-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
-/*
- Hardware drivers
- */
-/*
- NS16550 Configuration
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-/*
- select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */
-/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400,
57600,\
115200}-#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION
-/* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support
*/
-#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\
"1920k(u-boot),128k(u-boot-env),"\
"4m(kernel),-(fs)"-#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support
*/
-#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands
*/
-#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP
-#define CONFIG_SYS_NO_FLASH
-/*
- I2C
- */
-#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX
-/*
- TWL4030
- */
-#define CONFIG_TWL4030_POWER
-/*
- Board NAND Info.
- */
-#define CONFIG_SYS_NAND_QUIET_TEST -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to accessnand
*/ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to accessnand
at */
/* CS0 */-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number
of */
/* NANDdevices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of
jffs2 */
/* partition */-/* Environment information */ -#define CONFIG_BOOTDELAY 2
-/*
- PREBOOT assumes the 4.3" display is attached. User can interrupt
- and modify display variable to suit their needs.
- */
-#define CONFIG_PREBOOT \
"echo======================NOTICE============================;"\
"echo \"The u-boot environment is not set.\";"\
"echo \"If using a display a valid display varible for yourpanel";" \
"echo \"needs to be set.\";"\
"echo \"Valid display options are:\";"\
"echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";"\
"echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharpw/ASIC";" \
"echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";"\
"echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";"\
"echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp(DEFAULT)";" \
"echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";"\
"echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";"\
"echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";"\
"echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";"\
"echo \"Defaulting to 4.3 LCD panel (display=15).\";"\
"setenv display 15;"\
"setenv preboot;"\
"saveenv;"-#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x81000000\0" \"bootfile=uImage\0" \"mtdids=" MTDIDS_DEFAULT "\0" \"mtdparts=" MTDPARTS_DEFAULT "\0" \"mmcdev=0\0" \"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \"if run loadbootscript; then " \"run bootscript; " \"else " \"run defaultboot;" \"fi; " \"else run defaultboot; fi\0" \"defaultboot=run mmcramboot\0" \"consoledevice=ttyO0\0" \"display=15\0" \"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \"rotation=0\0" \"vrfb_arg=if itest ${rotation} -ne 0; then " \"setenv bootargs ${bootargs} omapfb.vrfb=y " \"omapfb.rotate=${rotation}; " \"fi\0" \"otherbootargs=ignore_loglevel early_printkno_console_suspend\0" \
"addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \"common_bootargs=setenv bootargs ${bootargs}display=${display} " \
"${otherbootargs};" \"run addmtdparts; " \"run vrfb_arg\0" \"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \"bootscript=echo 'Running bootscript from mmc ...'; " \"source ${loadaddr}\0" \"loaduimage=mmc rescan ${mmcdev}; " \"fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \"ramdisksize=64000\0" \"ramdiskaddr=0x82000000\0" \"ramdiskimage=rootfs.ext2.gz.uboot\0" \"ramargs=run setconsole; setenv bootargs console=${console} " \"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \"mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \"run ramargs; " \"run common_bootargs; " \"run dump_bootargs; " \"run loaduimage; " \"fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage};"\
"bootm ${loadaddr} ${ramdiskaddr}\0" \"ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \"run ramargs; " \"run common_bootargs; " \"run dump_bootargs; " \"tftpboot ${loadaddr} ${bootfile}; "\"tftpboot ${ramdiskaddr} ${ramdiskimage}; "\"bootm ${loadaddr} ${ramdiskaddr}\0"-#define CONFIG_BOOTCOMMAND \
"run autoboot"-#define CONFIG_AUTO_COMPLETE -/*
- Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer
Size
*/ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)-#define CONFIG_SYS_MAXARGS 16 /* max number of
command
args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
/*address
*/
-/*
- OMAP3 has 12 GP timers, they can be driven by the system clock
- (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1)
=> 8
*/
-/*
- Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be
populated
*/ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-/*
- FLASH and environment organization
- */
-/* **** PISMO SUPPORT *** */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE ONENAND_MAP -#endif
-/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
-#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#endif
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR
(CONFIG_SYS_INIT_RAM_ADDR
- \
CONFIG_SYS_INIT_RAM_SIZE - \GENERATED_GBL_DATA_SIZE)-/*
- SMSC922x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X -#define CONFIG_SMC911X_16_BIT -#define CONFIG_SMC911X_BASE 0x08000000
-#endif /* (CONFIG_CMD_NET) */
-/*
- BOOTP fields
- */
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010
-#endif /* __CONFIG_H */
2.5.0.457.gab17608
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- Tom