This patch removes warp7_secure_defconfig. A previous patch set CONFIG_ARMV7_BOOT_SEC_DEFAULT=y on the unsecure WaRP7 config. Fabio asked if I could confirm that the NXP and upstream kernels will boot on the WaRP7 with CONFIG_ARMV7_BOOT_SEC_DEFAULT=y. I can confirm that this is the case, so there's no need to support the secure defconfig - drop it now.
Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Suggested-by: Fabio Estevam fabio.estevam@nxp.com Reviewed-by: Fabio Estevam fabio.estevam@nxp.com --- board/warp7/MAINTAINERS | 1 - configs/warp7_secure_defconfig | 43 ---------------------------------- 2 files changed, 44 deletions(-) delete mode 100644 configs/warp7_secure_defconfig
diff --git a/board/warp7/MAINTAINERS b/board/warp7/MAINTAINERS index 0fc9746606..1d3ee29222 100644 --- a/board/warp7/MAINTAINERS +++ b/board/warp7/MAINTAINERS @@ -4,4 +4,3 @@ S: Maintained F: board/warp7/ F: include/configs/warp7.h F: configs/warp7_defconfig -F: configs/warp7_secure_defconfig diff --git a/configs/warp7_secure_defconfig b/configs/warp7_secure_defconfig deleted file mode 100644 index 915f2185c9..0000000000 --- a/configs/warp7_secure_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_TARGET_WARP7=y -CONFIG_ARMV7_BOOT_SEC_DEFAULT=y -# CONFIG_ARMV7_VIRT is not set -CONFIG_IMX_RDC=y -CONFIG_IMX_BOOTAUX=y -# CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg" -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_BOOTD is not set -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_DFU_MMC=y -CONFIG_FSL_ESDHC=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="FSL" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_ETHER=y -CONFIG_USB_ETH_CDC=y -CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" -CONFIG_OF_LIBFDT=y