Re: [U-Boot] [U-Boot, 6/6] overo: Override RAM setup for rev. 0 boards

On Tue, Apr 28, 2015 at 04:17:55PM -0700, Ash Charles wrote:

From: Arun Bharadwaj arun@gumstix.com

Overo boards with board revision 0 use a 256MB RAM + 256MB NAND chip. For an unknown reason, these boards fail to boot a 3.17.8 kernel based on the RAM size configuration in u-boot. As a workaround, fake out the RAM setting in u-boot (discussion [1]).

[1] http://gumstix.8.x6.nabble.com/running-built-images-tt4969794.html

Signed-off-by: Arun Bharadwaj arun@gumstix.com Signed-off-by: Ash Charles ashcharles@gmail.com

Just for the record (since I just dug into it), this change was included in the v2 of the series that created board/overo/spl.c and thus not needed.