RE: [U-Boot-Users] BDI2000 Error on MPC8540 Custom board

I tried reducing the JTAG clock frequency but with no success.

On Thursday 02 June 2005 13:34, Shirasat Girish-ags032 wrote:

Hi all, I am trying to debug Uboot 1.1.2 on one of our custom boards which has MPC8540. When i connect the BDI2000 i am getting the following.. Can anybody please let me know what is going on.

• TARGET: waiting for target Vcc
• TARGET: waiting for target Vcc
• TARGET: processing power-up delay
• TARGET: processing user reset request
• BDI asserts HRESET
• Reset JTAG controller passed
• Bypass check: 0x55 => 0xFF
• JTAG exists check failed
• Remove HRESET and try again
• Bypass check: 0x55 => 0xAA
• JTAG exists check passed
• Platform IDCODE is 0x1003001D
• Core PVR is 0x80200020
• Core status is 0x00C1
• Platform status is 0x0001
• SAP status is 0x0005
• SAP CCSRBAR is 0xFF700000
• BDI scans core HALT command
• Core status is 0x00C1
• Platform status is 0x0001
• SAP status is 0x0005
• BDI removes HRESET
• TARGET: Target PVR is 0x80200020
• TARGET: resetting target passed
• TARGET: processing target startup ....
• Core status is 0x00C1

*** Core is stopped, no restart possible # PPC: timeout while waiting for halt

• TARGET: processing target startup passed

BDI>reset

Regards, Girish

Hmmm,

saw this yesterday in a customers' mail. Reducing the JTAG clock helps -> check the bdi.config, section [TARGET] JTAGCLOCK

Cheers, Gerhard