Hello,
We are using MPC8260ADS board with SDRAM configured and running till the point
where u-boot1.1.1 shows the prompt.

At this point, the kernel and FS is loaded to SDRAM by the u-boot.
We are executing the command 'DM 0x100000' and we can see that indeed
the kernel was loaded but some memory cells are not identical.

We suspect that the problem is in either: board_init_f or board_init_r
but we don't know exactly.

Q: where should we go from here?  are there any changes/patches
 that I need to know for u-boot1.1.1?  

p.s. we can send the sources and the changes that we did so far
to get to this point.

Thanks,
Ronen