7 Mar
2014
7 Mar
'14
11:59 p.m.
On 02/26/2014 12:59 AM, Suresh Gupta wrote:
USB spec says that the minimum disconnect threshold should be over 525 mV. However, internal USB PHY threshold value is below this specified value. Due to this some devices disconnect at run-time. Hence, phy settings are tweaked to increased disconnect threshold to be above 525mV by using this workaround.
Signed-off-by: Suresh Gupta suresh.gupta@freescale.com
Changes for v2:
- Incorporated missing SOC's affected by errata
Applied to u-boot-mpc85xx/master. Thanks.
York