Hi Michael,
On Wed, Jan 24, 2018 at 3:12 PM, Michael Nazzareno Trimarchi michael@amarulasolutions.com wrote:
From the datasheet I have:
Software Input On Field. Force the selected mux mode Input path no matter of MUX_MODE functionality. 1: Force input path of pad A14. 0: Input Path is determined by functionality of the selected mux mode (regular).
So i think that in case of some peripheral this is not relevant but I need confirmation
Looking at arch/arm/boot/dts/imx25-pinfunc.h I see that there is only one pin that sets the SION bit in the common pin definition:
/* * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon * bug that configuring the SD1_CMD function doesn't enable the input path for * this pin. * This might have side effects for other hardware units that are connected to * that pin and use the respective function as input. */ #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000