Hi Heiko,
On 30 November 2016 at 04:52, Heiko Stübner heiko@sntech.de wrote:
Am Dienstag, 29. November 2016, 19:47:10 schrieb Simon Glass:
Hi Heiko,
On 29 November 2016 at 16:45, Heiko Stübner heiko@sntech.de wrote:
Hi Simon,
Am Sonntag, 27. November 2016, 10:01:40 schrieb Simon Glass:
This v3 patch is an update on Sjoerd's original v2 series from Feburary. I have dealt with the changes requested at the time, and adjusted the way that the speed change is handled.
Tested on firefly-rk3288, rock2.
Tested on a firefly as well. Though I get mixed results in my netboot environment. At 100MBit (manually limited) everything seems fine:
Speed: 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.140.58 (269 ms) Using ethernet@ff290000 device TFTP from server 192.168.140.1; our IP address is 192.168.140.58 Filename 'hstuebner/firefly.vmlinuz'. Load address: 0x4000000 Loading: #################################################################
################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### 2.9 MiB/sdone Bytes transferred = 7033483 (6b528b hex)
5 out of 5 boots worked fine.
but at 1000MHz I only get:
Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.140.57 (270 ms) Using ethernet@ff290000 device TFTP from server 192.168.140.1; our IP address is 192.168.140.57 Filename 'hstuebner/firefly.vmlinuz'. Load address: 0x4000000 Loading: #####T #T #T ##T T #T #T T ####T #T #### Retry count exceeded; starting again
on 5 boots. 1 lonely boot also worked at 1000MBit for some unknown reason. I'm not sure if just my switch is some special snowflake (TL-SG1024 from TP- Link) or there is some other voodoo at work here.
The rootfs over nfs seems to work fine on 1000MBit though.
Yes I see some timeouts, although I don't think it is anything to do with the driver conversion. Or does this not happen unless my patches are applied?
nope, really looks like some other parts are just not fast enough? And the setup of GRF and so on, look the same as in the linux kernel, so should be fine as well.
So to be clear, are you saying that the same problem happens on a downstream tree that you tried, or not?
In terms of 'not fast enough' you could try turning off HDMI if that is on. Also see veyron_init() and see if you can adapt that to firefly to get the clock speed up?
Regards, Simon