-----Original Message----- From: Ajay Bhargav [mailto:ajay.bhargav@einfochips.com] Sent: 13 February 2012 18:58 To: linux@bohmer.net Cc: Prafulla Wadaskar; marek.vasut@gmail.com; u-boot@lists.denx.de; Ajay Bhargav Subject: [v3 3/3] Armada100: gplugD: Add USB command support
This patch adds support for USB commands and USB storage device for Marvell gplugD
Signed-off-by: Ajay Bhargav ajay.bhargav@einfochips.com
Changes for v2:
- removed unwanted ifdef
- fat and ext2 command support moved to new patch
Changes for v3:
- Not changed
include/configs/gplugd.h | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 9813309..061ebe6 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -72,6 +72,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA +#define CONFIG_CMD_USB
/* Disable DCACHE */ #define CONFIG_SYS_DCACHE_OFF @@ -134,4 +135,15 @@ #define CONFIG_CMD_EDITENV #define CONFIG_CMD_SAVEENV
+#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ARMADA100 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif /* CONFIG_CMD_USB */
+#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_SUPPORT_VFAT
#endif /* __CONFIG_GPLUGD_H */
1.7.7.2
Applied to u-boot-marvell.git next branch
Regards.. Prafulla . . .