Re: [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression

On Thu, Jun 25, 2020 at 08:14:57AM -0300, Fabio Estevam wrote:

Since commit:

commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc Author: Michael Walle michael@walle.cc Date: Thu May 7 00:11:58 2020 +0200

phy: atheros: ar8035: remove static clock config

We can configure the clock output in the device tree. Disable the
hardcoded one in here. This is highly board-specific and should have
never been enabled in the PHY driver.

If bisecting shows that this commit breaks your board it probably
depends on the clock output of your Atheros AR8035 PHY. Please have a
look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
"clk-out-frequency = <125000000>" because that value was the hardcoded
value until this commit.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

, the clock output setting for the AR803x driver is removed from being hardcoded in the PHY driver and should be passed via device tree instead.

Update the device tree with the "qca,clk-out-frequency" property so that Ethernet can work again.

Reported-by: Soeren Moch smoch@web.de Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Soeren Moch smoch@web.de

Applied to u-boot/master, thanks!