Update the bindings doc for Exynos DW MMC block to follow the upstream example and reflect the latest changes made in corresponding Linux kernel bindings.
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- doc/device-tree-bindings/exynos/dwmmc.txt | 46 +++++++++++++---------- 1 file changed, 27 insertions(+), 19 deletions(-)
diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt index 694d1959162c..d90792be8599 100644 --- a/doc/device-tree-bindings/exynos/dwmmc.txt +++ b/doc/device-tree-bindings/exynos/dwmmc.txt @@ -12,7 +12,9 @@ SOC specific and Board specific properties are channel specific. Required SoC Specific Properties:
- compatible: should be - - samsung,exynos-dwmmc: for exynos platforms + - samsung,exynos4412-dw-mshc: for Exynos4 platforms + - samsung,exynos-dwmmc: for Exynos5 platforms + - samsung,exynos7-dw-mshc-smu: for Exynos7 platforms (with SMU block)
- reg: physical base address of the controller and length of memory mapped region. @@ -23,32 +25,38 @@ Required Board Specific Properties:
- #address-cells: should be 1. - #size-cells: should be 0. -- samsung,bus-width: The width of the bus used to interface the devices +- bus-width: The width of the bus used to interface the devices supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO). . Typically the bus width is 4 or 8. -- samsung,timing: The timing values to be written into the - Drv/sample clock selection register of corresponding channel. - . It is comprised of 3 values corresponding to the 3 fileds - 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register. - . SelClk_sample: Select sample clock among 8 shifted clocks. - . SelClk_drv: Select drv clock among 8 shifted clocks. - . DIVRATIO: Clock Divide ratio select. - . The above 3 values are used by the clock phase shifter. +- samsung,dw-mshc-ciu-div: The divider value for the card interface unit (ciu) + clock (0..7). +- samsung,dw-mshc-sdr-timing: The timing values for single data rate (SDR) mode + operation. + . First value is CIU clock phase shift value for TX mode (0..7). + . Second value is CIU clock phase shift value for RX mode (0..7). +- samsung,dw-mshc-ddr-timing: The timing values for double data rate (DDR) mode + operation. If missing, values from samsung,dw-mshc-sdr-timing are used. + . First value is CIU clock phase shift value for TX mode (0..7). + . Second value is CIU clock phase shift value for RX mode (0..7).
Example:
mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <1>; -} + bus-width = <8>; + non-removable; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <1 3>; + samsung,dw-mshc-ddr-timing = <0 2>; +}; + In the above example, . The bus width is 8 - . Timing is comprised of 3 values as explained below + . Divider value for CLKSEL register is 3. The CIU clock rate will be + calculated as SDCLKIN / (3 + 1). + . SDR and DDR timings are comprised of 2 values as explained below 1 - SelClk_sample 3 - SelClk_drv - 3 - DIVRATIO - . The 'removable' flag indicates whether the the particilar device + . The 'non-removable' flag indicates whether the particular device cannot be removed (always present) or it is a removable device. - 1 - Indicates that the device is removable. - 0 - Indicates that the device cannot be removed. + Flag is present - Indicates that the device cannot be removed. + Flag is not present - Indicates that the device is removable.