Hi Fabio,
in attachment there are my configuration files.
I started from SabreSD and i changed very minimal parts.7
Could you check if you see any error in my files?
thanks
------------------------------ *Ing. Fausto Sessego* *R&D Hardware & Software Engineer* info mob
*Tecnologie Wireless per la logistica e la sicurezza* http://www.infomob.it *a:* Parco scientifico e tecnologico della Sardegna, Edificio 1 Loc. Piscinamanna - 09010 Pula (CA) https://www.google.it/maps/place/Sardegna+Ricerche/@38.9899811,8.9280376,17z/data=!3m1!4b1!4m2!3m1!1s0x12e7274e0b4c4191:0x1a9e7f06456bbd3 *p:* +39 070 92432952 *e:* fausto.sessego@infomob.it *w:* www.infomob.it
2017-04-10 16:45 GMT+02:00 Fabio Estevam festevam@gmail.com:
Hi Fausto,
On Mon, Apr 10, 2017 at 7:54 AM, Fausto Sessego fausto.sessego@infomob.it wrote:
Hi,
i have a problem with my custom board.
I created my custom u-boot and, now, i would like load automatically the kernel by CONFIG_BOOTCOMMAND.
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \ "if mmc rescan; then " \ "echo test1; " \ "else echo test2; fi; "Because i have the "if" condition, i enabled the CONFIG_HUSH_PARSER=y
into
deconf file.
Adding this CONFIG, the u-boot stuck
CONFIG_HUSH_PARSER=y is enabled in many mx6 boards without issues.
It is difficult to see what is wrong without seeing your patch adding the support for your board.
Make sure you are using the latest U-Boot code and check what other mx6 boards are doing.