On 13.12.2011 17:19, Fabio Estevam wrote:
On Tue, Dec 13, 2011 at 2:12 PM, Dirk Behme dirk.behme@de.bosch.com wrote:
Looking at the binary I sent you it has
U-Boot 2011.09-01509-g1d76eb8-dirty (Dec 13 2011 - 16:28:33)
Sorry, I made a typo.
2011.09 works fine for me, but 2011.12-rc1 does not boot my sabrelite.
Tried booting two boards (mx28 and mx6qsabrelite) using the latest origin/master tree, and both of them failed. Ok, both are not in mainline yet, so I will try a mx53 board next.
If your sabrelite boots on the latest master tree, please let me know.
After rebasing Jason's patches to latest git head:
U-Boot 2011.12-rc1-00010-g0626de4-dirty (Dec 14 2011 - 11:34:10)
CPU: Freescale i.MX61 family rev1.0 at 792 MHz Reset cause: unknown reset Board: MX6Q-Sabre Lite DRAM: 1 GiB WARNING: Caches not enabled MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 mmc0 is current device
** Unable to use mmc 0:2 for fatload **
** Unable to use mmc 0:2 for fatload ** Booting from net ... Unknown command 'dhcp' - try 'help' Wrong Image Format for bootm command ERROR: can't get kernel image! MX6QSABRELITE U-Boot >
Best regards
Dirk