Use meaningful meacros IMX6_BMODE_*, instead of numerical number in boot mode detection code.
Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Signed-off-by: Jagan Teki jagan@openedev.com --- arch/arm/imx-common/spl.c | 39 ++++++++++++++++++----------- arch/arm/include/asm/imx-common/sys_proto.h | 34 +++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 15 deletions(-)
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c index fc3704b..38789b2 100644 --- a/arch/arm/imx-common/spl.c +++ b/arch/arm/imx-common/spl.c @@ -30,39 +30,48 @@ u32 spl_boot_device(void) if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */ (imx6_is_bmode_from_gpr9() && (reg == 1))) return BOOT_DEVICE_UART; + /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */ - switch ((reg & 0x000000FF) >> 4) { + switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) { /* EIM: See 8.5.1, Table 8-9 */ - case 0x0: + case IMX6_BMODE_EMI: /* BOOT_CFG1[3]: NOR/OneNAND Selection */ - if ((reg & 0x00000008) >> 3) + switch ((reg & IMX6_BMODE_EMI_MASK) >> IMX6_BMODE_EMI_SHIFT) { + case IMX6_BMODE_ONENAND: return BOOT_DEVICE_ONENAND; - else + case IMX6_BMODE_NOR: return BOOT_DEVICE_NOR; - break; + } /* SATA: See 8.5.4, Table 8-20 */ - case 0x2: + case IMX6_BMODE_SATA: return BOOT_DEVICE_SATA; /* Serial ROM: See 8.5.5.1, Table 8-22 */ - case 0x3: + case IMX6_BMODE_SERIAL: /* BOOT_CFG4[2:0] */ - switch ((reg & 0x07000000) >> 24) { - case 0x0 ... 0x4: + switch ((reg & IMX6_BMODE_SERIAL_MASK) >> + IMX6_BMODE_SERIAL_SHIFT) { + case IMX6_BMODE_ECSPI1: + case IMX6_BMODE_ECSPI2: + case IMX6_BMODE_ECSPI3: + case IMX6_BMODE_ECSPI4: + case IMX6_BMODE_ECSPI5: return BOOT_DEVICE_SPI; - case 0x5 ... 0x7: + case IMX6_BMODE_I2C1: + case IMX6_BMODE_I2C2: + case IMX6_BMODE_I2C3: return BOOT_DEVICE_I2C; } break; /* SD/eSD: 8.5.3, Table 8-15 */ - case 0x4: - case 0x5: + case IMX6_BMODE_SD: + case IMX6_BMODE_ESD: return BOOT_DEVICE_MMC1; /* MMC/eMMC: 8.5.3 */ - case 0x6: - case 0x7: + case IMX6_BMODE_MMC: + case IMX6_BMODE_EMMC: return BOOT_DEVICE_MMC1; /* NAND Flash: 8.5.2, Table 8-10 */ - case 0x8: + case IMX6_BMODE_NAND: return BOOT_DEVICE_NAND; } return BOOT_DEVICE_NONE; diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 99e3869..d0cf3f1 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -42,6 +42,40 @@ #ifdef CONFIG_MX6 #define IMX6_SRC_GPR10_BMODE BIT(28)
+#define IMX6_BMODE_MASK GENMASK(7, 0) +#define IMX6_BMODE_SHIFT BIT(2) +#define IMX6_BMODE_EMI_MASK BIT(3) +#define IMX6_BMODE_EMI_SHIFT GENMASK(1, 0) +#define IMX6_BMODE_SERIAL_MASK GENMASK(26, 24) +#define IMX6_BMODE_SERIAL_SHIFT GENMASK(4, 3) + +enum imx6_bmode_serial { + IMX6_BMODE_ECSPI1, + IMX6_BMODE_ECSPI2, + IMX6_BMODE_ECSPI3, + IMX6_BMODE_ECSPI4, + IMX6_BMODE_ECSPI5, + IMX6_BMODE_I2C1, + IMX6_BMODE_I2C2, + IMX6_BMODE_I2C3, +}; + +enum imx6_bmode_emi { + IMX6_BMODE_ONENAND, + IMX6_BMODE_NOR, +}; + +enum imx6_bmode { + IMX6_BMODE_EMI, + IMX6_BMODE_SATA = 0x2, + IMX6_BMODE_SERIAL, + IMX6_BMODE_SD, + IMX6_BMODE_ESD, + IMX6_BMODE_MMC, + IMX6_BMODE_EMMC, + IMX6_BMODE_NAND, +}; + static inline u8 imx6_is_bmode_from_gpr9(void) { struct src *psrc = (struct src *)SRC_BASE_ADDR;